P1000 / Edge Evolution CS / Emissions Inspection (NJ)
#1
P1000 / Edge Evolution CS / Emissions Inspection (NJ)
I have a 2008 with the 4.6L and Edge Evolution CS running canned tunes. I know Edge says a truck running their tunes will pass state inspections, but I always have tuned it back to stock to get inspected. As always, when tuning back to stock, it throws the P1000 which usually takes me 2 weeks to clear. Towards the end of that cycle my battery died, so now I have to start over, but am running out of time to get the truck inspected this month. I'm pretty sure I'll fail inspection with the P1000, so my questions:
• I do not think when you tune to the canned tunes it throws the P1000 - Is that true?
• Does anyone have experience passing/failing NJ emissions while running a canned Edge tune?
• I do not think when you tune to the canned tunes it throws the P1000 - Is that true?
• Does anyone have experience passing/failing NJ emissions while running a canned Edge tune?
#2
#3
P1000 simply means that all sensors have not achieved readiness yet. This will take some drive cycles to clear.
Any time the PCM loses power - dead/disconnected battery - or the PCM is cleared (loading a tune will do this) it has to start over, so to speak.
http://www.obdii.com/drivecycleford.html
https://repairpal.com/how-to-perform...ic-drive-cycle
http://www.obd2.com/support/reprog/d..._procedure.pdf
Any time the PCM loses power - dead/disconnected battery - or the PCM is cleared (loading a tune will do this) it has to start over, so to speak.
http://www.obdii.com/drivecycleford.html
https://repairpal.com/how-to-perform...ic-drive-cycle
http://www.obd2.com/support/reprog/d..._procedure.pdf
#4
I am in California, where the emissions laws are the strictest in the country. I use a custom tune. I've never returned to stock. Passed inspection every single time, with a custom tune.
#5
#6
#7