Great post!! I cant believe you did it without a lift!! It took me and a buddy that knew what he was doing about three hours to do it on mine. We had all the power tools and a lift in the shop,so that should give you a good idea of how long it takes. The Dynatechs are top quality also and the sound is to die for!!! I get compliments on the way it sounds all the time,except for the unfortunate soul thats in a car on my right side when I hit the go pedal,its hilarious watching them kring and try to cover up their ears!
Again, great post!!!
As far as a performance gain,I couldnt tell any difference really until I had it retuned by JDM @ FFW in Ennis that following weekend. Then I noticed a big difference,but I had also ported and polished my heads and intake before the header install and retune. So if you install headers and dont notice much,get a retune and you'll be more than happy. I giggle like a school girl everytime I drive it now.

 

Your welcome Art-Man. Glad to hear it helped you out.

 

Great write up . I am geting my Kooks long tubes and High flow cats on Monday . I wil be doing the install soon . Your write up will deffinately save lots of time. Thanks for takeing the time to do this ,

 

all i can say is wow. thanks for the great how to buddy. i am installing my bassani cb in the morning and this how-to is 100x better than the instructions that came with the kit.

 

You are very welcome fellas! It's nice to be able to give something back to the forums. Lord knows I have sure learned a lot from here. Enjoy your new exhaust systems, you are going to love them!

 

 

Todd -

Thanks for the thorough "how to." Saved me a ton of time and from much frustration. Your time putting this together was/is much appreciated.

Brad

 

Your welcome gents and glad it helped.

 

Best how-to I've ever seen.

 

Thanks Incogneto!

 

Bump for a gem of a write-up

 

Can we just turn the cats so the O2 sensors face inwards as to avoid messing with the heat shield? If so, I'm sure we can swap the cats from left to right to make this happen. I'm about to install mine, exact same setup from Dynatech, and would like to know before installing. Thanks! :-)

 

Took me forever to figure out how to get the transmission dipstick tube back in place after passenger side header install. First tried through the top, nope. Then actually tried from underneath, nope... Never would have guessed it pops right in from the side lol. Was so proud, I had a beer.