Knock sensor on 95 5.0???
 

I have a 95 5.0 150 and I'm trying to sort all the problems out with it...as i'm sure you can tell by all my posts :) anyways...i'm getting a "knock sensor not detected" code or something close to that (I forget what the number is)

Do 5.0s even have knock sensors? I didn't think so, but I could be wrong?? If they do, where is it? I've looked all over and can't find it.

BTW: I have a pinging problem with the truck as well.

Thanks alot,
scott

Your knock sensor is on the very back of the motor.(right on top of the engine block itself). Trust me it is a major pain to get too,but it is there.

i am lookinmg at a picture of componant locations in my book right now and it looks to be under the plenium near the rear of the motor

Before you replace it, make sure you performed the KOER self test correctly. If you failed to reach WOT when prompted, a knock sensor code will come up.

Take care,
-Chris

Check the base time for the pinging.

Thanks for the help!

-scott

lack of egr flow will cause pinging. but i think pkrwud is right. you need that wot when doing koer. if you dont it will give you that code. and nothing is wrong.