1996 4.9L clutch replacement - which size?
#1
1996 4.9L clutch replacement - which size?
According to all the listings I can find, my truck takes a 10" clutch. Its a 96, 2WD, M5OD with a GVWR of 6250 lbs. Picked up the 10" clutch from NAPA, measured it, its 11" across. The clutch out of the truck is also 11" across. The new NAPA clutch has more surface area to the one I just pulled out (which is an aftermarket one). What is the difference between the 10" and 11" clutches (is the 11" actually 12" across?)? Does it matter which size clutch goes in?
#2
Join Date: Nov 2006
Location: Memphis, TN 38135, USA, Earth
Posts: 5,495
Likes: 0
Received 7 Likes
on
7 Posts
Are you measuring across the CLUTCH (the fibrous part), or the pressure plate in the diaphragm? The clutch should measure at its nominal size.
Most of those flywheels are drilled & tapped for both sizes of clutch, but to go from 10 to 11, you'd need to have it resurfaced. To go from 11 to 10, that's not necessary.
Most of those flywheels are drilled & tapped for both sizes of clutch, but to go from 10 to 11, you'd need to have it resurfaced. To go from 11 to 10, that's not necessary.
#3
#4
#5