Engine swap to an 83
I was wondering if I could swap a 351W EFI from a 88 Econline into my old 83 f-150, I have a 351W in there now but it's completely worn out. Thanks in advance.
|
No problem, but I would retain the carb instead of trying to use the EFI unless you know what you're in for. Fuel system upgrades, wiring, pcm, etc. The basic engine is the same.
|
Ok, it has a dual fuel carb... I kinda wanted to get rid of that with out buying another carb. I imagine I could find one for cheap.
|
Is it a 2 or 4 barrel? If it is a 2, you can replace it with a regular Motorcraft 2 barrel from almost any older engine. If it is a 4 barrel, put a Holley 600 on it. Wait, do you mean the variable venturi? If so, you may have an early EEC 3 system. Which means you also need to install a Duraspark distributor and Duraspark ignition module that bolts to the fender. This will be better in the long run anyway, due to the fact that the EEC 3 system had many problems. Let me know if you need more info.
|
Originally Posted by bigbronc
(Post 3545951)
Is it a 2 or 4 barrel? If it is a 2, you can replace it with a regular Motorcraft 2 barrel from almost any older engine. If it is a 4 barrel, put a Holley 600 on it. Wait, do you mean the variable venturi? If so, you may have an early EEC 3 system. Which means you also need to install a Duraspark distributor and Duraspark ignition module that bolts to the fender. This will be better in the long run anyway, due to the fact that the EEC 3 system had many problems. Let me know if you need more info.
|
All times are GMT -4. The time now is 05:17 PM. |
© 2024 MH Sub I, LLC dba Internet Brands