Hey guys, so I have a set of lights up for grabs. They have been retrofitted with components from TheRetrofitSource.

Here are the specs:
-FX-R 3.0 Bi-Xenon Projectors w/ 3" Lens
-Apollo 2.0 Shrouds w/ Custom Aluminum Shroud Extensions
-Morimoto 5Five (50W) Ballasts
-Morimoto 5Five (50W) Bulbs - 6000K
-H13 Bi-Xenon Wiring Harness

The housings are brand new, but the lenses are not. They are genuine Ford OEM lenses, but they have are slightly used. I'd rate them at 4-4.5 out of 5 in condition. Nothing noticeable unless you're right up against the lens, but just making anyone aware.

With the ballasts pre-mounted to the housings, all you have to do is run the wiring harness and it's all plug and play! :)

The price is $685 shipped in the 48 states. Feel free to PM me or post here with any questions or inquiries!
Thank you

Now on to the pictures!

Attachment 10067

Attachment 10068

Attachment 10069

Attachment 10070

Attachment 10071

Attachment 10072

Attachment 10073

Attachment 10074

Edit: Fixed a picture link.

And here is a cutoff shot:

Attachment 10061

If I hadn't done what I did, I would consider this. looks amazing, and very reasonably within what it is. GLWS

Thanks, man!
It'd be a great set for someone especially since they're getting FX-R projectors.

fxr 3.0 and a stock housing at that for someone trying to stay stock!

Bump!

Feel free to make an offer. I just might say yes!

Bump

If they were black instead of chrome I would definitely consider it.

These are sold! Thanks for the interest, everyone.

Saleen, I apologize for this total noob question, but I like the look of the projector lenses, as well as the output you're getting. I'm a little confused though, because you say the housings are new but the lenses are not. Can you explain what you mean? Did you simply pull the lenses off of the factory headlights and affix them to the new housings with silicone? Or are the projector lenses installed within the factory headlight housings? Any info helps, thanks!

Hey! So on this particular set (which is long gone), I started with a new set of headlights. But while they were opened and being worked on, I ended up needing the lenses for something else. So once they were done, I installed a spare set of lenses I had on them. Hopefully that makes sense. This is all referring to the actual headlight lens, not the projectors or anything else.

I do have another thread on here that has a set currently for sale. Simply looking to sell them, so someone will end up with a great deal on it!

Feel free to ask any other questions you may have!

What's the title on that thread? Or do you have a link? I'm sure I could dig around but what's the process for installing them as far as any additional hardware? I believe the HID kits need new wiring kits etc. is that the case with these as well?

I'll send you a PM with some info.