4x4 engage problem
Please help....I have a 1993 F-150 4x4 that will not engage in 4 wheel drive. It has the electronic button on the dash and when I push to engage all I get is a clicking noise. This noise sounds like it is coming from the glove box. I believe Ford changed the electronics in 1994 and had problems with it but I don't think this is the same problem since mine is a 1993. Could it be as simple as a bad solenoid? If so is this located on the fire wall on the passenger side?
This truck belonged to my father and I inheritied it so I do not have the owners manual. Is there a trick to engaging the 4 wheel drive? |
Could be the solenoid on the transfer case. I had a Ranger with the same setup and that's what went bad on it.
|
Thanks for the suggestion, I will check the transfer case for a solenoid.
|
Get under the truck and tap on what looks like a power window motor on the rear of the transfer case while someone else pushes the 4x4 button. The motor will get stuck from lack of use and a little tap will get it working again.
Robbie |
Read my note on 4 X 4 not working
|
Thanks for all the help
Thanks for the replies to my problem. I tried both of theses but alas I finally had to replace the motor on the back of the transfer case. But your suggestions allowed me to talk to the service manager with some knowledge. Great web site. :)
|
All times are GMT -4. The time now is 06:37 AM. |
© 2024 MH Sub I, LLC dba Internet Brands