Camera interference after LED worklights added
 

Ok so I have a 2008 King Ranch F150 4x4, I have always had a set of incandescent aux. back-up lights under the draw bar. I decided today to change them out with LED's and wouldn't you know it, with the truck running and in reverse with the lights on I can not see out the camera anymore. Nothing but lines. With the truck off, it is clear as a bell. I moved the wires around for the camera and my lights to add some separation and it got a little better but still fuzzy. My lights are isolated from the OEM stuff. Separate power wire on a relay, switched by a separate fused rocker. the lights I bought are nice and heavy duty but they were really inexpensive, so I'm guessing the shielding inside is not the best or does not exist. Any thoughts are appreciated.