Hey guys,
just got the emblem back up camera from ebay that included the wire harness. everything looks great but the wire colors aren't matching to what is posted here. I have seen two different posts regarding wire colors but here is what mine looks like. I bet the pinouts are the same and I can match it up using that but here is what mine looks like (the one I bought from eBay). Anyone else see this???I hate to solder rca end on and then it not work.

My Harness:
1 - Purple/Or
2 - White/Grn
3 - Br/Purple
4 - Dk Gray
5 - Blk/Grn
6 - Lt Gray/Purp

Most Common Harness -
1- red/ 12v + voltage
2- black/ shield
3- blue/ not used
4- white/ video +
5- green/ video -
6- black/ -ground

Alternate #1 Harness -
1. Gray = 12V
2. Black/Orange = Shield
3. White= not used
4. Brown = Video +
5. Brown/Yellow = Video -
6. Black/Green = Ground

Any ideas??? I don't have access to service info.