F150online Forums - View Profile: JScharp 7675

Go Back  F150online Forums > Members
Reload this Page >

JScharp 7675's Profile

JScharp 7675 JScharp 7675 is offline


About Me

  • About JScharp 7675
    I'm Justin, I have a 2006 F-150 with a Roush Cold Air Intake and an Edge Evolution chip. I do alot of my own work on trucks.
    Mentor, Ohio
    Four wheeling, Truck pulling an 2005 F-350(professional pulling truck)


Total Posts
Visitor Messages
Total Likes
General Information
  • Last Activity: 02-25-2015 04:05 PM
  • Join Date: 05-13-2009


Showing Friends 1 to 10 of 12

Visitor Messages

Showing Visitor Messages 1 to 10 of 11
  1. 06-15-2012 01:52 PM
    wanted to say thank you for the TOTM vote! It's greatly appricaited!
  2. 03-24-2012 11:31 AM
    Thank you so much for the TOTM vote!!

  3. 04-14-2011 11:02 AM
    Haha ya, the tip is a has a 4" inlet and the pipe from my muffler back is 4" so it wasn't too difficult
  4. 04-08-2011 11:46 AM
    Ya man I had a local guy here in town do up the exhaust and its a flowmaster single chamber with a 8" tip that I got at his shop and we ran it out the back just like how it was stock
  5. 08-26-2010 04:34 PM
    I can get them to you for $450
  6. 06-27-2010 10:15 PM
    Thanks for your vote in TOTM!
  7. 10-10-2009 01:05 AM
    Got about roughly.... 15,000 miles on them and they still have lots left.
  8. 09-24-2009 07:49 PM
    Hey Scharpie, I gots some cash, sold the shaft, you up for some front and rear gear installation!
  9. 09-08-2009 06:39 PM
    I like the lift, I haven't done much offroading though. I'd look through the lift before you go to install it, make sure every part is there. It sucks getting everything torn apart and finding out you need a bolt that you can't find anywhere. Also make sure you get the lower control arm bolts really tight because you can knock your alignment out of whack pretty easy if they arent. Not sure on the torque spec.
  10. 07-16-2009 03:27 PM
    In my opinion, for a lift, Rize is bullet proof compared to other products. Remember I'm also just your regular Joe, but unlike others I truly abuse my turck to the max. The lift is best of most lift out there and as you said, you don't and probably won't off road so you will definitely be more that fine with it. The lift not only looks good but it's its worth every penny you put in it. You can use stock parts on the lift and don't worry about quicker wear and tear. One thing though if ya gonna go for the lift you have to add the cost of new and bigger tires and if you go with bigger tires you will have to re gear. Tire size 35's minimum, 37's maximum. Any other question you may have don't hesitate to ask, asking is best way to gain knowledge.
    Take a look at how I hammer my truck, if you have a youtube account done forget to rate and or comment.

Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

© 2019 MH Sub I, LLC dba Internet Brands

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.