Thanks, I put mine in last week and they work great. Didn't need new u-bolts, the old ones were long enough, and they did come with the wear pads. Install was pretty easy too.

I had a question about your Pro Comp AAL. I want to run the same thing and was wondering how the 34134 fit and if they come with the plastic wear pads. I saw some pictures of installed springs that seemed a little short for the '06-'08's. I have an '06 screw. Did those springs come with new ubolts also, or do I even need them? Thanks

would underdrive pulleys and an e fan be too much on a stock alterntor? Is it best to increase the idle by 75 rpms or so to compensate?

what type of Hankooks are you running? I live in Idaho and so I need a tire that's going to be able to take a beating in the winter. We've already had 3 pretty bad storms so far and I've heard the GY's are really good in the snow which why I'm leaning towards them but I'm always open to suggestion. Thanks!

Does it resonate in the cab at all at around 55-70 once the rpms have dropped down around that 1800RPM mark?

Was just wondering how your exhaust looks and performs for you. I was also wondering if you dig the muffler in the tip look or not. Let me know.

hey bro.. how much would it cost me to switch my 3.73's,,9.75" to 4.10's?
5.4 v8 4x4 2005 lariat