Blackwood nav unit
 

Does anyone have any insight in to the removal of the navigation head unit and CD drive as well the CD changer for the Alpine head unit? I have replaced the Alpine head unit with a Pioneer 8200NEX Nav unit and finally found a pocket to replace the old nav unit. I plan on keeping all of the original parts so the car can be returned to original in the future but for the present, I'd like to have the additional pocket space.

I'd recommend calling or looking on Crutchfield's website.

Finally got around to removing the nav unit and installing the cubby unit. Took about a half an hour to remove the head unit and the two cd drives. Frees up a lot of room in the center console, the major draw back is that there is no place currently to mount the valet switch for the rear cover. need to work that out. I have boxed up all the pieces up so that the truck can be returned to stock at any time.

expedition came with an optional button for rear parking aid. I wonder if that button placement is the same as your valet switch is.....

as far as I know you can get the console deck

with or without rear air controls
big pocket
or small pocket and square pocket
with or without rear park distance on any of the above options

here is a pic with AC controls and with the Park Distance button i mentioned

http://bestcarmag.com/sites/default/...47-6010780.jpg

The Blackwood has a park assist in the same position and the Expedition. The Valet switch is located inside the center console (armrest) and is controlled by the ignition key. It was mounted in the piece of plastic that covers the nav unit Cd player and the ten disc CD changer/.

ahhh gotcha!

dont think it would be that hard to remove the swtich and make a small holder/bracket that tucks into the corner of the console