Any Black L's with Cervini Ram Air or Shaker Hood?
 

Does anyone have a picture of a black L with either the Cervini's Ram Air or the Pro-Glass Shaker hood (Soap perhaps...)? I've searched back through several pages and have found several red L's with the Cervini's hood but no black ones...

Thanks in advance,

Dan

thulsa...

I have already checked out that thread you pointed me to and there isn't a single black L with either of the hoods mentioned...there is a black L with the cowl induction hood (not my style) and several black L's with the Cobra F1 hood (not my style either) and then we have the Pro-Comp hood. RobG's truck is in there but the orange on the hood throws me and Soap has pictures of his black hood but it's not on his truck. I've already gone back through about 15 pages of posts and haven't found an answer to my original question.

Dan:

I'll help you out, man...

https://www.f150online.com/galleries...-893-11843.jpg

Datz Cheatin

As requested...http://www.f150inline.com/galleries/cfm?gnums=601

Bumpity bump bump bump!

here's a pic of jl's
https://www.f150online.com/galleries...-707-12342.jpg
and i just had to put this one up also cervini cowl hoodhttps://www.f150online.com/galleries...1-522-3814.jpg

Here you go
 

See if this works....
https://www.f150online.com/galleries...1094-10880.jpg

Duplicate post deleted...

Black 2000,

You da man! That's exactly what I was looking for and to make it even better it would appear you were nice enough to install Speed Grilles, the Bullitt fuel door and clear corner lenses for me so I'd know exactly how the Cervini's would look on my truck! Now can you swap out those '99-00 wheels for some '01 wheels???

Thanks again,

Dan

How about 01' Rims Chromed....
 

All you have to do is tell me that the check is in the mail.:D
Sorry, can't help you there on 01' rims. But I am looking to get some 00' chromed.
Thanks for the compliments.:)
Later...

Damn I need to take some pics........I have the shaker hood and factory 2001 18" wheels chromed :( Sorry I will try to post some ASAP.

--Joe

This is my truck before the Shaker.
https://www.f150online.com/galleries...6-713-5803.jpg
The hood was OK but I had to bring the fenders in about an 1/8th of an inch on both sides just to narrow the gaps.
The Pro-Finish hood has no such problems. That's why I'm such a huge fan of the Pro-Finish hoods. Perfect fit & finish.

https://www.f150online.com/galleries...6-205-6775.jpg

No gaps here....
 

Just some rubbing on the front of the hood to the top of the grill shell. Haven't gotten around to adjusting it yet.
Gotta say That Truck Is Awesome Rob.
You said that you use 3M hand polish to keep the black looking good?? where do you get it from?
Thanks...