Lightning

Chip Question

Thread Tools
 
Search this Thread
 
Old Nov 24, 2001 | 07:33 PM
  #1  
fordmech00's Avatar
Thread Starter
|
Member
Joined: Nov 2001
Posts: 48
Likes: 0
From: Baltimore, Md
Chip Question

I have a JET performance chip in my truck, would i need a new chip if I were to install a 90mm mass air flow sensor?
 
Reply
Old Nov 24, 2001 | 07:38 PM
  #2  
spanky777will's Avatar
Banned for Violation of Vendor Rules
Joined: Sep 2001
Posts: 303
Likes: 0
From: Beltsville, Maryland 5 mins from UMD
Since when did JET make a chip for the Lightning? TThe only ones to my knowledge are Superchip(JDM only uses the superchip but their own program), JL, and PSP. You will have to get the chip reburned
 
Reply
Old Nov 24, 2001 | 08:20 PM
  #3  
fordmech00's Avatar
Thread Starter
|
Member
Joined: Nov 2001
Posts: 48
Likes: 0
From: Baltimore, Md
i e-mailed JET when i got the truck and they said they had one, so i ordered it
 
Reply
Old Nov 24, 2001 | 08:26 PM
  #4  
LIGHTNINROD's Avatar
Senior Member
Joined: Apr 2001
Posts: 5,939
Likes: 0
From: Warner Robins, Ga, CSA
I think the Jet chips are 'generic'--not tuneable for any other mods you might add and, I think they only 'help' at WOT. The 4 or 5 Lightning -specific tuners will customize their chip for your specific truck and mods and their's 'work' all through the rpm range--including WOT

Dan.
 
Reply
Old Nov 24, 2001 | 08:28 PM
  #5  
ShadowBolt's Avatar
Senior Member
Joined: Nov 1999
Posts: 1,566
Likes: 0
From: Olympus
What Dan said!

Jerry
 
Reply
Old Nov 24, 2001 | 08:28 PM
  #6  
fordmech00's Avatar
Thread Starter
|
Member
Joined: Nov 2001
Posts: 48
Likes: 0
From: Baltimore, Md
Thanx for the info. Sounds like time to give JDM a call.
 
Reply
Old Nov 24, 2001 | 08:36 PM
  #7  
ShadowBolt's Avatar
Senior Member
Joined: Nov 1999
Posts: 1,566
Likes: 0
From: Olympus
Or.... JL, or PSP! You will be happy with any one of the three.


Jerry
 
Reply

Trending Topics

Old Nov 24, 2001 | 08:44 PM
  #8  
Don's Bolt's Avatar
Senior Member
Joined: Nov 2001
Posts: 6,166
Likes: 0
From: Burlington, Ma
Originally posted by fordmech00
Thanx for the info. Sounds like time to give JDM a call.
Maybee you should even drive up to NJ and have him tune the truck.
 
Reply




All times are GMT -4. The time now is 11:49 AM.