Hello 12's...
 

Last night was my second time to the track with the '00. Temp was about 72 degrees, pretty high humidity, baro was about 30.0x.

60ft -- 1.853
1/8 -- 8.236
1/4 -- 12.922
mph -- 103.92

I only got 4 runs in, with my first run going a blistering 14.7 @ 66 mph (boost shut off...grrr!). I credit my new times to a reburn from Danny and my recently added PSP lower pulley. I ran 1.8xx 60 ft times every run. I do feel the truck has more in it, especially on the top end.

The only sad note was I lost to a 2001 ram air trans am...by .073 sec (he caught me sleeping at the tree). However, he would not race me again, though I did my best to get him to. All in all a good night.

------------------
Black '00
#2216

Way to go with the 12s! About how much time did the pulley knock off?

DUCK

------------------
November 18, 1999 We will not forget.
The fallen 12 will live in our hearts forever.
Fightin' Texas Aggie Bonfire 1999

Nice!! https://www.f150online.com/f150board/biggrin.gif https://www.f150online.com/f150board/biggrin.gif https://www.f150online.com/f150board/biggrin.gif

------------------
SAL - TEAM PSP
web- www.powersurgeperformance.net
E-mail sales@powersurgeperformance.net
tech@powersurgeperformance.net
F-150 Online Supporting Vendor

wrightlightning

You are my hero !! 2nd time at the track and you run in the 12's.......

I am jealous

Doug

Thanks for the nice responses guys! https://www.f150online.com/f150board/smile.gif

DUCK01,
Well, I honestly do not know. The only two things I changed from last time (in alomst IDENTICAL conditions) were a new reburn from Danny and the PSP pulley. My 60 ft times were more than a full tenth better, my 1/8 et's dropped over 2 tenths, my 1/4 et dropped 3 tenths and was up 1 mph. I am almost positive the pulley was fully responsible for the better 60 ft and 1/8 et's, and 75% responsible for the 1/4 et's/mph. Just my thoughts.

Sal,
Thank you! Thank you! Thank you!

Silver_2000_ https://www.f150online.com/f150board/wink.gif!,
Awww, shucks! Thanks!

------------------
Black '00
#2216

wright-
THANKS! https://www.f150online.com/f150board/smile.gif

Are you running slicks? Nice 60'.

------------------
2000 Silver Lightning 13.16 (so far)
PSP 4-way
PSP Filter Kit
PSP Lower Pulley
Level 10 Shift kit
F-250 Trans pan
MagnaFlow 12468
Snug-Lid

I feel a 12.xx coming on.

Team PSP West

Silver-Bolt,

Thanks! I am running 16x26x10.5 MT ET Streets on American Racing 16x8 rims. I was spinning WELL past the 60 ft mark on the runs as well. With some good air and some better traction, I believe that 1.7's are very possible. https://www.f150online.com/f150board/biggrin.gif

------------------
Black '00
#2216

Congrats on the 12's! I have a question about the lower pulley. Have you noticed when you "see boost" since the pulley swap? I'm wanting to know if the boost comes in sooner with the pulley. I do a decent amount of towing with my L, so I can't do any mods that will compromise its pulling ability.

------------------
'01 silver Lightning
Superchips flip chip, JDM filter kit
'67 Chevy II Nova
10.62 @ 125 MPH N/A

Great run!

------------------
99 Lightning, JL Ram Air, Daiblo Chip(JL Programmed)and 90mm MAF,JL Power Cooler, Level 10 shift kit,PSP Lower pulley, Single Blade T/B, Bassani exhaust, . 12.42 at 109.6..Full trim and stock convertor, MT Street ET's.

Thanks guys!

Trevor D,

The boost does come on faster with the pulley. I would think it would only HELP you with towing...just a thought. https://www.f150online.com/f150board/smile.gif

------------------
Black '00
#2216