Those who've used the Belltech shackles
 

Did you kit come with the extra set of bolts needed to connect everything? If not, what size bolts/washers/nuts did you use? Is something special needed? I just got my kit and there's nothing in the instructions about it. Thanks.

Bob

No. You need to reuse the stock bolts...


------------------
Rich
1999.5 SVT Lightning - Red. 100HP Shot Nitrous(NOS), NGK TR6 Plugs, BellTech 3/4 drop, BellTech Nitroactive shocks, Ford MotorSport Chrome Lightning wheels, JDM Chip. K&N Filter. Viper Alarm w/remote start, Sir Michael's roll pan, smooth corners and steps w/billet inserts, clear corner lenses, Cervinis Ram Air hood, ARE Cover w/ wing, Momo billet pedals, cd changer, cover, Phantom boost and nitrous gauges, MTX Thunderform w/ 2 - 10" JL Audio W-3 subs. 5-channel 500w. Clarion amp., (4)Polk Audio 3-way, 130w. DX 7's, Color-matched Muth signal mirrors, Soundproofed cab, BedRug, Trenz billet grills, Piaa 9007 Super Whites, Bucket Seat Conversion, Carbon fiber dash(photogenesis), etc. Build #2755
TampaSVT@Tampabay.rr.com

http://home.tampabay.rr.com/tampasvt/

2001 Lexus IS-300
2001 EB Expedition

Hey I have a question about shackles also, actually a few.

Those of you who have done belltech, do any of you have a part num?

Those who have lowered in the rear, did you replace the shocks, or will the stock shocks work fine with a 2' drop?

And since our trucks came from the factory with the (_|_) end higher, wouldn't we lose some handling characteristics if we only lower the back, but maintain the stock tuning by giving it an equal drop on all 4 corners?

------------------
2001 Silver L

Mods (so far):
Shag carpeting for the bed
sportmaster tonneau cover
premier 720 HU

to get list:
cervini ram air hood
some form of ram air
lower blower pully
the rest of the stereo
some sort of shift kit
maybe a chip

TampaSVT, I see where I went wrong. There's already a set of shackles on there, just smaller. Thanks.

captainoblivious, I ordered mine from Mike at LightningPerformance. Less than $60 shipped. He can be reached at uni4money@aol.com. Don't have any answers for your other questions.

Bob

Cpt:

2" rear drop doesn't require shocks. If you did the hangers too, certainly do shocks...

You'll probably like the ride of the 2" rear drop. Levels the truck out nicely.

Rich

Chain saw, His name is Mark and it's Lightninforce. https://www.f150online.com/f150board/wink.gif

------------------
Silver 2001
Bed Rug
Black Max tonneau
Belltech Drop Shackles
JDM Billet Filter Kit

I went with my stock shocks and no other parts are needed. All the guys at the shop loved the kit and the guy who alinged the truck just loved it 2