Help My Truck Won't Start!!
 

I just got through installing JDM's throttle body, 90 mm mafs and JL's air kit. Now my truck won't start. It will run for a fews seconds then die. I have checked to make sure all the sensors are back in place. The only thing I have noticed is that I now have quite a bit of slack in the 2 cables that attach to the side of the throttle body, I would assume these are the throttle cables. Any ideas???


HANKFAN

Hankfan,

I had some "issues" with my Pro-M and my truck acted similar to what you are talking about. Mine would run if I gave it some gas. I would suggest checking to make sure the MAF is plugged up good. If so, replace your original to see if it will run. Did you get a chip burned for the MAF?

Good luck!

------------------
Black '00
#2216

you dummy......you havent had your chip reburned.............wtf wrong with you...have that kitty on your mind and it has f#*@ed up your thinkin!

------------------
red 1994 lightning....oh my god i never expected this thing to keep running this long......130,000 miles and still running strong.........

00 white L...# 1993 build date 4/5/00 JL filter kit 2"drop shackles and JL flip chip billet third brakelight cover, water wetter, mobil 1........later it may get NOSty........

It had nothing to due with the chip, I found a hose under the rubber boot that was loose. It's fine now.


Brian

Good work Hankfan, Let us know what you think of the new set up.

------------------
2000 Lightning Silver frost
Clear corners (Front only)
PSP Intake, JDM Chip, Bed Rug, Snuglid

<~Kickin Red for being mean to Hank (cousins right??) Play nice hehe
CA