An update of where I'm at on this project. We built a fixture but I did not care for the amount of welding to create this item. I now have a major supplier bending 4" diameter tubes at the correct angle for me after which they will be annealed. There will be no weld seams in this item, only the welding on of a few bungs for the ACT, vacuum and PCV. All openings will have the correct interface to the mass air flow sensor and the trrottle body. I hope that there will be an interest as I have commited to building 50 of these items. Additionally, since there are no weld seams this unit will be able to be polished without showing weld lines. Thank you.

 

Mike,

Please put my name on one.

 

Thanks BABolt, I am patiently waiting!


HANKFAN

 

Put me in for one

 

I'm in .

 

BA
Please put me down for power pipe and e-mail me with t/b prices and type of payment required for both.
Thanks Bill
spark-doctor@mediaone.net

[This message has been edited by SVT_01_Sparky (edited 01-26-2001).]

 

BABOLT-
I am still interested, in the power pipe and the billet throttle body. Any estimated time or price yet? Can't wait!!

------------------
Bill
'00 white lightning-#2030 of 4966-4/6/00 thursday
muth mirrors,door key pad mod,
clear corners, super white; headlights,corners,fogs.
trenz billet upper and lower grills, billet 3rd brake light cover,
harley davison bed cover,
on ordered JDM flip chip, JDM lower pulley, J.L. stage 2 ram air kit,
more to come....

'00 harley davidson FLSTC tons of custom parts..
'99.5 nissan pathfinder le-stillen equipped
'88 toyota show truck(TONKA)
'91 toyota mr2 turbo
'00 yamaha banshee(toomy race kit/chrome pipes)

[This message has been edited by hdmlnium (edited 01-28-2001).]

[This message has been edited by hdmlnium (edited 01-28-2001).]

 

I too would like to know the price for each the T/b and the powerpipe. Please keep me informed. E-mail is at the bottom if need be.

------------------
-Marcus M.
Email-SnakEyez60@aol.com
Black 2001 ordered and impatiently waiting.
Moderator:BLackBoLT01 <A HREF="Http://www.SVTperformance.com" TARGET=_blank> </A>

 

I'm in!!

------------------
2000 Red Lightning - #835 of 4966 Born 3-8-00 / Delivered 3-22-00
22% Window Tint, Clear Corners, MPulse LoPro Tonneau, AIM 2" Drop Shackles, Bed Rug, PSP Filter Kit, Other Goodies, Group Buy Floor Mats
Best time: 13.45 sec. @ 101.99 mph

2000 Red Trans Am Ram Air WS6, 6 Speed - Delivered 2-15-00 - Awesome Looking Car

My Zing.com Album Click Here

 

I am in!!!!!!
Please leave mine natural,less heat rention.

[This message has been edited by Ruslow (edited 01-27-2001).]

 

You can put my name down.
I am in.

 

Sounds good! I would like some hp/torque data when available.

------------------
Black '00, #2216, Pro-M, Swanson Flip Chip, AIM 2" drop kit, JL Ram Air, S/B TB, 2# pulley on the way!

 

Hey Mike,

I don't think 50 will be enough! Need to add another 0 to that ...

 

BABolt
The pipes sound like they're gonna be nice. I'll take one please.
Dale

 

Hey babolt......have you priced the pipes yet......if they are reasonable....i am interested............

------------------
red 1994 lightning....oh my god i never expected this thing to keep running this long......130,000 miles and still running strong.........

00 white L...JL filter kit and more mods on the way....

 

I'm in!

 

Still interested in both. Prices???

------------------
Ed
White'00 #2006

 

stay out of it ruslow ...mee.mee first LOL

 

Count me in for a power pipe too! Brad

 

I'm in!

 

More information.
1. Aluminum tube .120 wall thickness.
2. Powder coated textured matt black.
3. Custom molded hoses.
4. Custom mounting brkt. for MAFS.
5. Polished stainless steel clamps.
6. Ready to bolt on show quality or I will
not sell it.
7. Custom colors and polishing extra.
8. Target price not to exceed $299.00

As I have stated each and every part that will make up this assembly is unique you will not find it elsewhere. I will have made or had custom made each and every item. It will out flow the stock item plus the inside wall will be smooth. The mounting bracket to support the air meter will be to your specification. There is a difference between the stock unit and the Pro-M. I will also offer a custom 4 inch diameter Pro-M adapter so that all restrictions can be removed from that meter.

 

I am in on the tube also. I have a Pro M so will need a tube for this set up.

 

Sounds great. How much for polished and coated with MAF. With a maching Polished Blower ?

Doug

 

BABolt - count me in on the power pipe!

------------------
#39 '00 white lightning
API trans chip
ASP 2# blower pulley
K&N filter (stock box)
Borla exhaust

 

If the same pipe fits the 2001 I am in too.

 

Save one for me Mike! How good it looks means very little to me. I'm in for the power!!!


Jerry

 

greetings, please, add another name to the list. i frequent this board and sometimes i reply but would like to remain anonymous, thats just the way it works. ill email the thread starter personally.

for those with peeks to ip logging please do not give any hints.

G'day


------------------
Anonymous Lightning owner.

 

I really appreciate the way you are always helping us. I don't know you but you have to be one hell of a fella.

I would like one also to fit the ProM. Thanks again for all that you do and for doing first class work!!!!!
Alvin

------------------
99.5 Ford Lightning - Full Bassani exhaust, Swanson Performance Chip,Pro-m,undersized pulley,3.73 ears,Transgo shift kit,Cal-trac bars, cobra type hood, snug top cover,2" drop in back, yellow stripes down red truck.
13.01 @ 103.6, 378 RWHP
http://www.zing.com/album/?id=4294235379

 

I think anonymouslightning is really John Coletti. He decided to keep his "L" after seeing all BABOLT's new pieces and parts. Way to go John!

 

BABolt,

Speedy is in for a Power Pipe.



------------------
Brake Late, Dive Deep

Speedin Bob
Owner/Operator/Pilot of the "Red Rocket" (your mileage may vary) Lightning #2504, 6/17/99
NLOC # 438
**pre-tuned for spring**
awaiting faster times
re-install of chipenfilter (JL horn and snorkel soon)
17" Expy rims with Comp T/A tires

2001 Summer setup
Shooting for 12's on street tires
JL Ram Air, JDM Chippage, Pulley (on the way), Driveshaft Loop (on the way), Keyless Entry, Retrax Bed Cover, Shackles, Wet Okoles, Mobil 1/FilterMag, Clear Corners (maybe tails)

 

Just wondering why you would want to stay anonymous? Unless you were thrown off the board, or you said you would never be back! Or your afraid your old lady will find out how much your spending on mods. LOL!!

 

Count me in too!
Thanks

 

Is this a cosmetic item or does it offer some kind of performance boost. Sounds nice, but what power advantage does it have?

 

Don't forget about me! I need one too.

Mike

 

Nice, very nice!

I'm in for a ProM modified one.

Daniel

 

BaBolt,

Im in. Black matte finish please

Thanks



------------------
Brian K
kimmel_brian@prc.com
thedink@ix.netcom.com

99.5 Black - Born 5/17/99

• 13.422 @ 100.98 (8.59 @ 82.37)
• Tinted Windows
• PSP Intake
• Clear Corners
• Autometer "Phantom" Boost Gauge
• JL Street/Strip FlipChip
• Bedrug
• Alpine Audio w/MB Quarts all around
• Tow Package
• Mobil 1
• Electric I/C Fan
• Street Scene Grilles
• JL Ram Air
• FRP Single Blade TB
• NGK TR-6's

Foolish man give wife grand piano, wise man give wife
upright organ

 

Jim's in!

Thanks again for all your exceptional work.

 

I like the sound of this!!!!! Count me in.
Lets make sure the trucks are going straight first!!!! They sould go faster.
;-)

Herb

 

If it will fit the 01, count me in.

seniorchief

 

Im in for one

------------------
2000 WHT LIGHTNING
#2013 Born 4/6/00
Stock 14.03 96.3mph
w/superchip 13.53 101.5mph
w/superchip and JL filter kit 13.23 @ 104.2