What would cause?
Thread Starter
|
Senior Member
Joined: Mar 2006
Posts: 127
Likes: 0
From: Huntsville, AL
What would cause?
Hey guys, I loaned my brother my L today so he could go to TN and pick up a Moser 9" rear for his WS6. On the way up there the truck back fired and the boost guage quit working. I was able to trouble-shoot the problem for him over the phone and luckily there was a shop near by that reinforced my only guess.
Problem was a vacuum line came lose after the back fire. It came loose at the tee where I spliced in the lines for the WOT Bypass (Boost Bypass).
Why would it back fire and cause this line to blow off?
Any and ever comment/suggestion is welcome!!
Thanks,
01_White_Light
Problem was a vacuum line came lose after the back fire. It came loose at the tee where I spliced in the lines for the WOT Bypass (Boost Bypass).
Why would it back fire and cause this line to blow off?
Any and ever comment/suggestion is welcome!!
Thanks,
01_White_Light
