Razor's Edge Intake Tube (pics)
 

Finally got mine made. Looks good so far. Not sure about one of the grommets, so I may epoxy it to keep extra air from entering..
On with the pics (install will be later this week)
http://www.hyperfiberbbq.com/uploads/REMTUBE1.jpg
http://www.hyperfiberbbq.com/uploads/REMTUBE2.jpg
http://www.hyperfiberbbq.com/uploads/REMTUBE3.jpg

Thats a lot of carbon fiber right there folks. Nice piece.

bet ya thats not cheap

That mass air is going to wreak havoc with your tune. Looks good though!

round 2...
http://www.hyperfiberbbq.com/uploads/REMTUBE4.jpg
http://www.hyperfiberbbq.com/uploads/REMTUBE5.jpg

Matias,
I called REM and specifically asked them if it would affect my tune. The new batches have the same 90mm diameter, or at least they said it did, so no worries. If I have to retune for this thing I'm gonna be bent. That would make it about a 500.00 intake :mad:

Nice VOIP phone

How does it clamp to the T/B?

same way as the stock, he jsut does not have the clamp on the rubber boot.

off topic, typhoon how do you like that head set, i was going to order the same one.

wow.................... way cool!!!!

That Plantronics unit is a GODSEND. I'm in the server room like 50% of my day and could never hear crap on my old set. This one ROCKS. I get about 150 foot range as well, so I can use it throughout our department, and still hear it ring when I'm down the hallway. I highly recommend it :thumbsup:

Are there slots in the carbon under the rubber boot? Carbon fiber like this does not flex or compress. If there is no allowance for compression it will crack. Dinan the infamous BMW tuner had that problem when they first came out with their carbon CAI's. Later models had slots.

Finally some genuine carbon fiber around here.
http://www.timskelton.com/postpics/yes/f_ckin_a.gif
:thumbsup:

Looks like what i do all day but with airplanes hehe. I hear there is a Carbon Fiber shortage in this nation, but thats what the guys upstairs say at least.