![]() |
What is the fewest mods anybody has run 12's in the 1/4 with.
Does that make sense? Im not asking what it takes to run 12's, but rather, who has run 12's with very few mods? What is the "record" so to say, for the least amount of mods somebody has used to get in the 12's?
|
Mike (Blueballs) in his 02 factory freak ran a 12.9something w/ a chip and filter. THATS IT.
VINNIE |
HIGH ROLLER ran at 12.86 with chip only on F1's in his 99!
|
Not that this is a 12 but I saw a guy run a 13.04 with a 4lb pulley and modded airbox on F1's with a 1.91 60ft. It isn't 12 but it should be with a little cooler weather and a better launch.
|
so how about without a chip? I thoughht there were a few out there who did it with no chip.
|
Originally posted by VINNIE Mike (Blueballs) in his 02 factory freak ran a 12.9something w/ a chip and filter. THATS IT. VINNIE |
Actually i ran a 12.75 best with a chip and air filter on f-1s.But i also ran a 13.2 bone stock too....i just lucked out and ended up with a freak truck.
Whats the whole freak driver thing all about though:D Mike 02 True Blue 11.98@112 best so far JDM Enhanced |
Originally posted by bluballz Whats the whole freak driver thing all about though:D |
Many 12.7's and 12.8's with Filter, Chip, n 4lb'r
Including a 1.80 60ft and 12.8 on F-1's using 93 pump gas |
Originally posted by fractaldragon HIGH ROLLER ran at 12.86 with chip only on F1's in his 99! --Joe |
Originally posted by VTSVT so how about without a chip? I thoughht there were a few out there who did it with no chip. --Joe |
Joey,
:fyi: My 99L went 12.89@106 at US41 with a chip and K/N filter only on a cold november afternoon. Get your facts straight bub:devil: |
Originally posted by HIGH ROLLER Joey, :fyi: My 99L went 12.89@106 at US41 with a chip and K/N filter only on a cold november afternoon. Get your facts straight bub:devil: Only reason your 99 was bad a$$ was becuase it was black :devil: Talk to ya later......... --Joe |
oops I said 12.86 instead of 12.89 :rolleyes: :devil:
|
Well my goal is to run 12's with the stock lower pulley and no chip, and not a whole lot of money invested in other mods. (mainly because I don't know how to install them) Doesn't look like anybody has done it with no chip and no lower so maybe I'll be the first.
|
| All times are GMT -4. The time now is 12:37 AM. |
© 2026 MH Sub I, LLC dba Internet Brands