Phenolic board
Senior Member
Joined: Apr 2002
Posts: 5,298
Likes: 1
From: here
Senior Member
Joined: May 2002
Posts: 148
Likes: 0
From: PDX
Originally posted by Silver-Bolt
BoDawg hit the nail on the head. I purchased a 12"x12"x 1/2" G-11 for $16.00. Don't bother with a lower grade, heat will break it down over time. Nothing like a vacuum leak to cause you problems.
BoDawg hit the nail on the head. I purchased a 12"x12"x 1/2" G-11 for $16.00. Don't bother with a lower grade, heat will break it down over time. Nothing like a vacuum leak to cause you problems.
Just because I know about this stuff doesn't mean I have any
I suppose you would be the person to talk to about longer bolts as well.
Senior Member
Joined: May 2002
Posts: 4,928
Likes: 1
From: The People's Republic of Los Angeles
Originally posted by Silver_2000_
!
. . . I hope that if you decide to try to make these that you start at square one and you dont buy one from a vendor and trace it to use as your starting point. . . .
! . . . I hope that if you decide to try to make these that you start at square one and you dont buy one from a vendor and trace it to use as your starting point. . . .
Thread Starter
|
Junior Member
Joined: Jan 2003
Posts: 5
Likes: 0
From: Southern IL.
I think the reason people will buy the board and do it themselves is because they don't want to pay the inflated price the vendor is asking for his.
Also the board that I ordered has a maximum temp. of 284 F, not 236. It should work fine.
If you can get G11 for $16 for the square foot, go that route. But when I see it for $130+, I find that price hard to believe.
Also the board that I ordered has a maximum temp. of 284 F, not 236. It should work fine.
If you can get G11 for $16 for the square foot, go that route. But when I see it for $130+, I find that price hard to believe.
Senior Member
Joined: May 2002
Posts: 148
Likes: 0
From: PDX
Originally posted by todd abbott
I think JDM spacer is 89.00, for 89.00 to pick up what gator picked up across the board it's a deal, 500.00 for my Accfab and less HP.
I think JDM spacer is 89.00, for 89.00 to pick up what gator picked up across the board it's a deal, 500.00 for my Accfab and less HP.