JDM Phenolic Spacer Dyno Graphs
:fyi:
First let me explain that a total of 4 pulls where made. 2 pulls back to back, cold and hot without the spacer. A 2 hour cool down, then 2 pulls back to back, cold and hot with the spacer. The runs without the spacer are Runfile .001(cold) and .002(hot) The runs with the spacer are Runfile .003(cold) and .004(hot) With the engine temp at 176 the first pull was made without the spacer. The intercooler temp was 99 and rose to 128 during the first pull. I didn't get any temp reading for the second run without the spacer, but it was pulled very shortly after the first. After the cool down period and with the spacer installed the engine was reading 178 and the intercooler temp was 104 and rose to 128 during the pull. No temps where taken during the second pull, but it was made shortly after. I might add, that after the second pull without the spacer, the intake plenum was warm to the touch. After the cool down period and the spacer was installed, the plenum was cold to the touch after the second pull. Sorry, no temperature reading other than my fingers So here are the the first pulls without the spacer (.001) and with the spacer(.003) https://www.f150online.com/galleries...3804-63323.jpg And these are the hot (second) pulls without (.002) and with the spacer(.004) https://www.f150online.com/galleries...3804-63322.jpg I hope this helps clear some *misconceptions* of what works and what doesn't work for our trucks. I think its a GREAT MOD ***BTW*** Before the kids come on and start some chit, Let it be known that I run parts from the following tuners..... PSP JDM JLP LFP ChikenEars Gator Speed Parts Ruslow **edit to add Ruslow** (I forgot ) |
Looks good to me, I gotta go drive mine now :)
|
Here are the cold runs with and without the spacer layed out so you can see the biggest gains in hp and tq
https://www.f150online.com/galleries...3804-63320.jpg https://www.f150online.com/galleries...3804-63321.jpg |
I'll try to answer any questions best I can. I didn't get to try the newly found hp as it was raining all the way home. But as you can see, there is hp and most importantly tq to be found with this spacer. It cheap hp the way I look at it.
The only question I got, is this......... "How do those words taste now, you disbeliever" No names needed:devil: |
I'm with Gator!
No one gains from all the bashing! Gator I personally thank you for the info! I would rather be accused of doing some thing than doing nothing! JDM has tried to be on the cutting edge of this sport I applaud them and the rest of the tuners who dare to be the best. It's true you cant please everyone but the proof as they say is in the pudding! I too run modes by…. Magnum Powers JLP JDM Razors Edge PSP Everyone of them have talked to me personally and have done what they said they would! This is not a slam to any one so please don't take it that way. "Respect is earned never given!" Peace, Suavy :bandito: |
From what I can see, it works, one question -- how thick is the spacer?.
Larry. |
THANK YOU GATOR!!!
But I'm with Speeder, would love a pic of the spacer:) |
Now please test with 1/2 inch aluminum spacer to determine if the gain is because of the length of the spacer or because the upper plenum is cooler.
|
You Guys.........
Its flucking raining outside, but cuz I love ya, Iam going outside right now to take a pick BRB |
https://www.f150online.com/galleries...-533-63202.jpg
Spacer pic, There are others in my spacer thread also. Link below. https://www.f150online.com/forums/sh...hreadid=120071 |
You the Man Gator!! :rocker:
|
Thanks Hilander.........but the man we ALL should be thanking is the guy that spent his money to make these for the Lightning trucks......Jim@JDM 732 780-0770--Is that the right # Vinnie
https://www.f150online.com/galleries...3804-63351.jpg https://www.f150online.com/galleries...3804-63352.jpg https://www.f150online.com/galleries...3804-63353.jpg |
Very Cool!
Thx for posting some great info! Paul G. |
Gator,
Just what you need. More H.p. and Torque. Nitrous Ronbo is going to looking at taillights for a while. :devil: Thanks JDM for a SWEET MOD that works. Unfortunately with the Shaker Hood I cannot (Height issues) be getting this mod , So I will have to live with spacer envy. VINNIE |
the Lightning faithful await an appearence from the "giver of cheap horsepower"
https://www.f150online.com/galleries...-209-23693.jpg good product/good reporting guys!! |
All times are GMT -4. The time now is 08:11 AM. |
© 2024 MH Sub I, LLC dba Internet Brands