F150online Forums

F150online Forums (https://www.f150online.com/forums/)
-   Lightning (https://www.f150online.com/forums/lightning-50/)
-   -   $3.95 DIY Heat Shield for Cold Air Intake (https://www.f150online.com/forums/lightning/105800-3-95-diy-heat-shield-cold-air-intake.html)

Ian's 5.0 09-18-2008 10:54 PM

This may be misplaced, or, "out of element", but I used to have a Nissan 240sx with one of these open element filters, sounded really good, noticed a bit of better throttle response. Then, I cut a hole under where the filter was, and installed a 90 degree bend piece of PVC, just to route some fresh air to the filter, don't know if it made any HP diff, but it made me feel better about the air coming in because I knew I always had a fresh air supply coming into my engine. Just a thought...

Neal 09-18-2008 11:45 PM

HI!... HOLY bringing back a thread from the DEAD "BATMAN". 5 years dead.............:devil:

Tim Skelton 09-19-2008 10:51 AM

http://uploads.libertylounge.net/files/resurrection.jpg

Odin's Wrath 09-19-2008 11:04 AM

I had forgotten all about this thread. LOL Blast from the past. I always wondered if that contraption collapsed under hard acceleration.

supercrewfx4 06-30-2010 03:26 PM

About to do this, any chance you can post the dimensions you came up with? And yes, this thread is back from the dead... again...

stoffer 06-30-2010 04:18 PM

another bump,, feel free to PM the OP as he doesn't frequent this site much

D4rK_An1mA 06-02-2011 07:10 PM

haha, thats awesome, never would have thought of that. great job


All times are GMT -4. The time now is 06:39 AM.


© 2024 MH Sub I, LLC dba Internet Brands