Just got my ported intake plenum from Paul and Tim about 1.5 hrs. ago. It's already installed. It would have been quicker; but, the 8mm bolt at the rear of the driver's side of the truck is a bitch. I didn't have a small enough wobbly extention. I had to use an allen wrench with a cheap socket jammed down on the end of it. Quarter turn, wiggle wiggle, reset, quarter turn, wiggle wiggle, reset........... and on and on and on...... Ouch!

It's a great looking piece. (On the inside of course.) I'll have dyno results soon.

 

I was gona drop by their shop when I was in Florida, but ran out of time. Glad to hear everything worked out for ya

 

Bad news . No gains at all on the dyno.

I have the files if anyone would like to post them for me.

 

Thats gotta hurt.How much did it cost you?

 

It is to bad you ran out of time.

I made sure I had time when I was in Florida to meet and see the shop.

They are nice guys, and florida is lucky to have them.

 

Paul and Tim are Kool......... Really nice people........

PEaCE................

 

Ouch

 

I got 12 RWHP and 11 RWTQ off my EXTRUDE HONE. Same Dyno. SAE corrected.


BTJ

 

Well, live and learn. It's kind of an expensive lesson though.

When I say no gains, I don't mean just the peak numbers. There was nothing under the curve either. A complete wash.


I used the same dyno for both pulls, also.

 

Hey BTJ,
Got any pics or info on your AFM powerpipe?
Thanks.

 

That's exactly right.

 

I was thinking of something a little stronger than ouch

 

 

 

Great pictures as always. Let me tell you fellers, when I first bought my PowerPipe, I had a hell of a time getting it to fit. I PM'd Odin's Wrath a couple of times and he talked me through the process. Much obliged.

BTJ