Seat lift for 97 Scab
 

I finally lifted the back seat up of my truck. After a week or two of research it is finally done. Let me know what you guys think, feedback is always great.

1) used a 1 5/8's inch metal rail
2) used two 12m x 80 1.50 bolts (10.9)
3) Screws to mount the rail to the original seat stand
4) Bolt in the bolts back of the seat
5) Screws to mount seat to the rail
Washers are optional for the screws. Would recommend

You will need a socket wrench, sockets (i believe i used 3/4 socket to get the bolts off holding the seat to the ground, 5/8 to bolt in the new bolts, Metric 12 for the seat stand bolts) screw gun

Here are some pictures, if anyone has any questions just let me know!

Seat Screwed into rail

http://img52.imageshack.us/img52/8161/photo16nb.jpghttp://img801.imageshack.us/img801/382/photo17z.jpg

Rail Screwed onto original seat stand

http://img696.imageshack.us/img696/9764/photo14zv.jpghttp://img706.imageshack.us/img706/5771/photo15vl.jpg

Bolt screwed down to hold seat to bottom of the truck

http://img828.imageshack.us/img828/7500/photo13p.jpg
http://img833.imageshack.us/img833/3270/photo18gd.jpg

Seat screwed to rail and the rail screwed to seat stand

http://img593.imageshack.us/img593/5927/photo12ic.jpg
http://img192.imageshack.us/img192/5923/photo19nn.jpg