F150online Forums

F150online Forums (https://www.f150online.com/forums/)
-   Interior Care (https://www.f150online.com/forums/interior-care-49/)
-   -   Change seat's (fabric to leather) (https://www.f150online.com/forums/interior-care/108136-change-seats-fabric-leather.html)

Joe Styles Feb 23, 2003 02:55 PM

Change seat's (fabric to leather)
 
Instead of buying a new truck I was thinking of doing some interior changes that I have seen on other trucks,dash,leather,console etc. And besides I am not that crazy about the 2004 ford f-150.

They look like the other pickups,chevy,dodge,toyoto.It just don't have that look that it had the past six years. Anyway I want to pull my fabric seats out of my truck,but every where I look I don't see no rear seats only the front buckets.Some of the places I looked got some radical leather seats, for about $600.00.

So I guess the best thing to do is go to the dealer and let them install them,unless someone has done this.I wanted a two tone that I seen at a few places.http://http://www.salesco.com/ is one of the placec..
Thank's JOE

http://www.salesco.com/qualitex/vip_tr23.jpg

kidtriton Feb 23, 2003 03:28 PM

www.classicsofttrim.com

i bought a set for a 2000 crew cab dually i had, and they fit EXACTLY like factory.

tatesrus Feb 25, 2003 09:15 PM

About how much does it cost to have the leather interior installed? Do they recover your existing seats or what? Thanks

kidtriton Feb 26, 2003 07:07 AM

Yes you have to recover them just like the factory covers were installed. I dont know how much, because i do the upholstery work at the dealership i work at, and its all usually warranty.

jscoggin Mar 2, 2003 02:14 PM

I just purchased a complete Classic Soft Trim set from Ebay shipped to my door for $340. They look real high quality. Classic has installation places all over and they quoted me $300 for install.

Marc Carpenter Mar 3, 2003 11:54 AM

I just had the stock seats in my Lightning redone in black leather with a light grey inlay in each seat. Total cost was $400.00, however I have used the same upholstery shop for several years and he really cut me a deal on these seats.

Marc

Joe Styles Mar 9, 2003 01:44 PM


I just purchased a complete Classic Soft Trim set from Ebay shipped to my door for $340. They look real high quality. Classic has installation places all over and they quoted me $300 for install.
Are you talking about just the material and then you must have someone install it,right.
Is that front and back.If it is that's a good deal and get it for my truck.thanks.

jscoggin Mar 10, 2003 11:54 AM

Yes, this was just the kit but came with front,back and console pieces. Quality is great. Classis specializes in doing dealer upgrades so they have to be factory equivelent. I tried to install myself but it proved a bit difficult to do correctly. I took it to a Classic Soft Trim facility and they installed for $150. Looks great.

Marc Carpenter Mar 15, 2003 12:58 PM

93Cobra just posted some pictures of the seats in my Lightning that I just had reupholstered in leather over on the Lightning page if your interested in seeing how they look in real leather.

Marc

Joe Styles Mar 16, 2003 06:26 PM

That looks awesome thats exactly what I want,I went to http://www.classicsofttrim.com/find...1015-PT#pattern and it had no images for my truck ,also they wanted to no what year I have a 1999 or 1999 1/2, how can I tell what year I have. I have bucket seat's with a console between them with arm rest,will I have to lose the arm rest like you did or can they cover them.Thank's for the help.
'JOE'

PS: I think I posted this at the wrong forum over in "Lighting."
No big deal I will post it here too.

31Charlie Mar 24, 2003 01:59 PM

The problem I have with my seats is that the center arm rest has no cup holders or console of any kinda, its just one fat arm rest. Is there any way i can swap it out with another one or do i to make my own? I have the 60/40 Bench Seat, btw.

31C

Joe Styles Nov 7, 2004 11:32 PM


Originally posted by 31Charlie
The problem I have with my seats is that the center arm rest has no cup holders or console of any kinda, its just one fat arm rest. Is there any way i can swap it out with another one or do i to make my own? I have the 60/40 Bench Seat, btw.

31C

not sure.good luck
JOE


All times are GMT -4. The time now is 05:58 PM.


© 2026 MH Sub I, LLC dba Internet Brands