F150online Forums

F150online Forums (https://www.f150online.com/forums/)
-   Illumination & Lighting (https://www.f150online.com/forums/illumination-lighting-131/)
-   -   HID's getting installed tomorrow (https://www.f150online.com/forums/illumination-lighting/442868-hids-getting-installed-tomorrow.html)

perryrl Mar 1, 2011 07:46 PM

HID's getting installed tomorrow
 
I know everyone here likes to do the retro-fit and all, but I just can't afford that, but I did go with some projectors for the wives 06 expy. Got her an 8000k kit and switch backs. HID kit and LED's came in today, and headlights will be here tomorrow. I am gonna take some pics and vid's of before and after and will post tomorrow. Once I am done with the exterior of hers, I can concentrate on mine. She already has the LED rears and third brake light, full LED interior, 35% tint. All I have left is the Precision mesh grill, and projector fogs with 3000k HID as well. I hope this goes easy and will let you all know how it went down. :rocker:

Raptor05121 Mar 1, 2011 11:06 PM

sounds good.

ak_cowboy Mar 2, 2011 01:17 AM

Sweet. Looking forward to those pics

perryrl Mar 2, 2011 12:39 PM

Ok well here is problem 1. Got the HID kit yesterday, and this morning started the install and got everything wired up. Well, just received the projectors and wouldn't you know it, they use an H3 headlight and not the factory 9006. So called HID Nation and they are going to exchange, however I am leaving Sunday and needed them soon, so I ordered the H3 bulbs and am sending the 9006's back for a refund. Here are some teaser pics to tide until Friday when I get the H3 bulbs to finish the job. Saving halo wiring until then as well.

perryrl Mar 2, 2011 12:44 PM

Before:
http://i52.photobucket.com/albums/g1...l/P3020048.jpg
Bare bones:
http://i52.photobucket.com/albums/g1...l/P3020050.jpg
After w/ Projectors:
http://i52.photobucket.com/albums/g1...l/P3020058.jpg
http://i52.photobucket.com/albums/g1...l/P3020057.jpg
http://i52.photobucket.com/albums/g1...l/P3020056.jpg
http://i52.photobucket.com/albums/g1...l/P3020055.jpg

perryrl Mar 2, 2011 12:48 PM

HID Kit:
http://i52.photobucket.com/albums/g1...l/P3020043.jpg
Box kit came in:
http://i52.photobucket.com/albums/g1...l/P3020042.jpg
9006 bulbs:
http://i52.photobucket.com/albums/g1...l/P3020044.jpg
Ballasts:
http://i52.photobucket.com/albums/g1...l/P3020045.jpg
Cancelors:
http://i52.photobucket.com/albums/g1...l/P3020047.jpg
Relay kit:
http://i52.photobucket.com/albums/g1...l/P3020046.jpg
Switchbacks:
http://i52.photobucket.com/albums/g1...l/P3020049.jpg
Driver's side laid out:
http://i52.photobucket.com/albums/g1...l/P3020051.jpg
Passenger side:
http://i52.photobucket.com/albums/g1...l/P3020052.jpg
Everything taped up:
http://i52.photobucket.com/albums/g1...l/P3020053.jpg
Projectors:
http://i52.photobucket.com/albums/g1...l/P3020054.jpg

perryrl Mar 2, 2011 01:01 PM

More pics tonight to show the difference of halogen and HID.

Raptor05121 Mar 3, 2011 01:19 AM

waiting for output pics...

FYI aftermarket headlights rarely use OEM bulbs :P but you already know that now :D

perryrl Mar 3, 2011 08:31 AM

Took output pics with halogens last night and will post here in a couple of hours, but I have a question. What is the best way to wire the halos to make them removable should anything happen to the headlight. I'm not big on the crimping, but that seems to be the only way, so I was thinking of tapping into the factory parking lights with single wire, and terminating that with some sort of connection to attach the halo wires so that they will be removable. Any other suggestions will be greatly accepted.

DanielWalker10 Mar 3, 2011 09:37 AM

if you have any experience with t-taps, wire taps, etc. that'd be your best bet in my opinion. it requires no splicing and depending on which style you get there can be no crimping and all you would need is a pair of pliers.

Raptor05121 Mar 3, 2011 11:09 AM

x2 on what daniel said

perryrl Mar 3, 2011 02:37 PM

Ok sounds like a good route to go. And as promised, here are the halogen output pics and pics of all the LED's everywhere else. Looking to find out what size bulb is in the visor vanity mirror. Tiny little thing.
Front on w/Flash:
http://i52.photobucket.com/albums/g1.../P30200422.jpg
Passenger Side:
http://i52.photobucket.com/albums/g1.../P30200502.jpg
Driver Side:
http://i52.photobucket.com/albums/g1.../P30200492.jpg
15' away Low Beam:
http://i52.photobucket.com/albums/g1.../P30200522.jpg
15' High:
http://i52.photobucket.com/albums/g1.../P30200542.jpg
Interior LED's:
http://i52.photobucket.com/albums/g1.../P30200452.jpg
http://i52.photobucket.com/albums/g1.../P30200442.jpg
Rear:
http://i52.photobucket.com/albums/g1.../P30200462.jpg
Reverse:
http://i52.photobucket.com/albums/g1.../P30200482.jpg

perryrl Mar 3, 2011 02:38 PM

HID's will be here tomorrow and will post final output pics then. Comment and critisism accepted and I have thick skin, and besides, it's mine and I like it so :P

DanielWalker10 Mar 3, 2011 07:54 PM

looks pretty good sir! check out v-leds.com they have the vanity lights you were speaking of.

perryrl Mar 3, 2011 08:57 PM


Originally Posted by DanielWalker10 (Post 4519293)
looks pretty good sir! check out v-leds.com they have the vanity lights you were speaking of.

I looked there and the vanity lights they have are festoon bulbs. These that I have are not. Autolumination.com carries them, but I just don't know the size. They are smaller than 194's, but not sure what a 78 light looks like and don't want to spend uneeded money on LED's that don't fit. I'll keep looking and probably just go to Ford to see if the stealership will at least let me know the size.:coffee:


All times are GMT -4. The time now is 08:24 PM.


© 2026 MH Sub I, LLC dba Internet Brands