In dash DVD
Thread Starter
|
Member
Joined: Aug 2005
Posts: 13
Likes: 0
From: Anaheim, CA
In dash DVD
Will any of these HU fit in a 2003 Lightning?
Alpine IVA-W200
Kenwood DDX 6019
Pioneer AVIC-D3
Picks if ya got em.
The websites say they won't fit but I know I've seen pics somewhere.
I don't want the type where the screen flips back into the unit. I tried a search but I can't find what I need.
Alpine IVA-W200
Kenwood DDX 6019
Pioneer AVIC-D3
Picks if ya got em.
The websites say they won't fit but I know I've seen pics somewhere.
I don't want the type where the screen flips back into the unit. I tried a search but I can't find what I need.
Senior Member
Joined: Oct 2004
Posts: 1,100
Likes: 7
From: Canada
Originally Posted by Mac Daddy
Will any of these HU fit in a 2003 Lightning?
Alpine IVA-W200
Kenwood DDX 6019
Pioneer AVIC-D3
Picks if ya got em.
The websites say they won't fit but I know I've seen pics somewhere.
I don't want the type where the screen flips back into the unit. I tried a search but I can't find what I need.
Alpine IVA-W200
Kenwood DDX 6019
Pioneer AVIC-D3
Picks if ya got em.
The websites say they won't fit but I know I've seen pics somewhere.
I don't want the type where the screen flips back into the unit. I tried a search but I can't find what I need.
Senior Member
Joined: Dec 2002
Posts: 1,558
Likes: 3
From: Eastern TN
I installed the IVA-W200 in my L - it requires that you trim the top of the inside plastic radio mounting area to allow the unit to slide into the dash.
You then have to drill mounting holes in the side plastic to screw the unit in place.
I wrapped the metal tang in back with duct tape and the rear of the unit rests nicely on it.
To put the trim ring on the unit, you will have to dremel off a little of the plastic on the back side of the dash bezel.
All in all, a fairly easy and straight forward install.
You then have to drill mounting holes in the side plastic to screw the unit in place.
I wrapped the metal tang in back with duct tape and the rear of the unit rests nicely on it.
To put the trim ring on the unit, you will have to dremel off a little of the plastic on the back side of the dash bezel.
All in all, a fairly easy and straight forward install.