compass zones and calibration
#2
Re: compass zones and calibration
Originally posted by dembones fx4
Does anyone know what the zones are for the compass. I live in So. Ca.
Also, how to calibrate compass?
Does anyone know what the zones are for the compass. I live in So. Ca.
Also, how to calibrate compass?
Compass calibration adjustment
Perform this adjustment in an open area free from steel structures and
high voltage lines. For optimum calibration, turn off all electrical
accessories (heater/air conditioning, wipers, etc.) and make sure all
vehicle doors are shut.
1. Start the vehicle.
2. To enter the compass calibration
mode, press and hold the button for
greater than eight seconds. The
display will then show CAL in the
display window.
3. Drive the vehicle slowly (less than 5 km/h [3 mph]) in circles until
CAL indicator turns off. As many as 5 complete circles may be required.
4. The compass is now calibrated.
Perform this adjustment in an open area free from steel structures and
high voltage lines. For optimum calibration, turn off all electrical
accessories (heater/air conditioning, wipers, etc.) and make sure all
vehicle doors are shut.
1. Start the vehicle.
2. To enter the compass calibration
mode, press and hold the button for
greater than eight seconds. The
display will then show CAL in the
display window.
3. Drive the vehicle slowly (less than 5 km/h [3 mph]) in circles until
CAL indicator turns off. As many as 5 complete circles may be required.
4. The compass is now calibrated.
Last edited by TonyPTX; 01-10-2005 at 05:25 PM.
#5
Join Date: Nov 2006
Location: Memphis, TN 38135, USA, Earth
Posts: 5,495
Likes: 0
Received 7 Likes
on
7 Posts
Can anyone tell me who's too lazy to open his owner's manual & look up that info?
http://fullsizebronco.com/forum/show...090#post423090
https://www.fleet.ford.com/maintenan...ls/default.asp
http://fullsizebronco.com/forum/show...090#post423090
https://www.fleet.ford.com/maintenan...ls/default.asp