F150online Forums
Page 1 of 3
1
2
3
Show 40 post(s) from this thread on one page

F150online Forums (https://www.f150online.com/forums/)
-   Chips, Tuners & Programming (https://www.f150online.com/forums/chips-tuners-programming-34/)
-   -   Edge can't remove governor? (https://www.f150online.com/forums/chips-tuners-programming/304128-edge-cant-remove-governor.html)

WilsonXXX Oct 9, 2007 11:38 AM
Edge can't remove governor?
 
Can XCal2?

hmfic Oct 9, 2007 12:00 PM
Originally Posted by WilsonXXX
Can XCal2?
I assume your talking about the speed limiter.. If so, they both can..

ASEMechanic Oct 9, 2007 12:10 PM
I don't know who told you that the Edge can't remove the governer/speed limiter, but it certainly can.

Good luck.

Bill

MGDfan Oct 9, 2007 01:09 PM
^^^ Wasn't me ! :lol: ^^^

Bluejay Oct 9, 2007 01:11 PM
Originally Posted by MGDfan
^^^ Wasn't me ! :lol: ^^^
You talk so much, how would you remember?:lol:

MGDfan Oct 9, 2007 01:21 PM
Originally Posted by bluejay432000
You talk so much, how would you remember?:lol:
Who are you again? :lol:

Bluejay Oct 9, 2007 01:23 PM
Originally Posted by MGDfan
Who are you again? :lol:
:lol:

scottbigred Oct 9, 2007 02:13 PM
:lol: just figured id throw that in there i didnt think you guys had enough :lol: lol

Bluejay Oct 9, 2007 02:15 PM
Originally Posted by scottbigred
:lol: just figured id throw that in there i didnt think you guys had enough :lol: lol
Thanks!:lol: :lol:

WilsonXXX Oct 9, 2007 03:51 PM
Originally Posted by ASEMechanic
I don't know who told you that the Edge can't remove the governer/speed limiter, but it certainly can.

Good luck.

Bill
I saw a couple threads with people saying their trucks still wouldnt go past 100 mph.

FX4 Matt Oct 9, 2007 03:54 PM
Originally Posted by WilsonXXX
I saw a couple threads with people saying their trucks still wouldnt go past 100 mph.
Then they should go into the Xcal2 and take the speed limiter off, its very easy to do :beers:

Ftruck05 Oct 9, 2007 04:10 PM
To adjust the limiter you have to custom tune(the EDGE). Just using lvl1,2, or 3 wont cut it.

Bluejay Oct 9, 2007 04:13 PM
Originally Posted by Ftruck05
To adjust the limiter you have to custom tune(the EDGE). Just using lvl1,2, or 3 wont cut it.
That takes all of 10 seconds.

crash_lucky13 Oct 9, 2007 04:40 PM
i'm glad it takes you that long. mine it takes about 5 minutes

Bluejay Oct 9, 2007 04:44 PM
Originally Posted by crash_lucky13
i'm glad it takes you that long. mine it takes about 5 minutes
Why so long? You go back to stock? If you want to change any thing, just save the settings, go change that one thing and enter the program. Doesn't take much longer than 10 seconds.


All times are GMT -4. The time now is 10:05 PM.
Page 1 of 3
1
2
3
Show 40 post(s) from this thread on one page


© 2026 MH Sub I, LLC dba Internet Brands