Q's about Edge programmer
 

Hey all i am thinking about getting the Edge programmer and i have a bone stock truck (2006 XLT S-cab 4x4 5.4 ) can i run the programer on a bone stock truck or do i need to get a air intake and exhaust i know it will perform better with a aftermarket air intake and exhaust but i am doing it bit by bit. (The reason i am getting the Edge first is i am putting on 33's and want to correct my speedo) any input would be great.

Thanks John

The Edge will work just fine on a stock truck. :thumbsup:

I did the exhaust, intake, then the EDGE.

If I had it to do over, I'd go with the EDGE first.

Best bang for the buck for sure.:thumbsup:

I'm running a stock '05. Edge works great :thumbsup:

EDGE was the first mod I did on my new 06 screw and it was bone stock. It will work fine. The other bolt-ons will help some too, but the EDGE will give you the biggest kick.

Thanks for the input guy's

John