I have a few questions for any one that knows anything about superchips chips, My questions are the following I just bought a Procharger PSc-1 intercooled supercharger with several bolt ons i want the chip to diffently firm up the tranny line pressures, change the speedo and get the tranny to shift properly with 37's and 4.88 i also want it to be custom tuned to all the mods i have on my truck to make it run alot better, what all is needed for all this andis there a contact info that anyone has to get this done I am in real need of this chip my truck runs like crap without one, My only concern is that my truck is for offroad and i need it to handle a serious beating is this a problem? Any help would be appriciated and i look forward to a response

Dan

 

With all those mods, I hope you've done some Fuel system work...

But talk with Mike Troyer (aka SuperChips_Distributor), and he'll get you set up. He sends you a sheet with all the info he needs from you on it, and then he'll take care of you!

Best of luck
-Flea

 

on the fuel system i have stock injectors but the new pump from procharger and i am running it rich on the FMU just to play it safe, it runs great now with the exception of the tranny but so far no complains onthe fuel

 

Hi Offroad,

Sure, we can take care of this for you, just give us a call.

We are America's oldest Superchips distributor, and we are also the first Superchips Custom Tuning Dealer. We specialize in this Ford platform, so we have provided the tuning for literally hundreds upon hundreds of these vehicles with superchargers added - a good number of those with the ATI centrifugal units.

You don't list any vehicle info in your post, but assuming this is a 1999 or newer F-150, we can dial the speedo in for the gear ratio & tire size in the PCM's program of course, as well as take care of making the automatic transmissions shift better and knock out a lot of the slippage to help it's friction materials (bands & clutches) last longer. If it's a pre-1999, then a speedo gear will be needed to correct the speedo, which is a simple & cheap thing to do - so either way, we can help you get the speedo's accuracy restored, shift points taken care of, etc., etc.

Give us a call & we'll go over all the details with you - our staff will make the arrangements to email you the custom program worksheets for you to fill out & return to us, and then I'll call you for a personal consultation on the tuning, etc. I am taking off this afternoon for Atlanta, but will be available via cell phone over the weekend - then I'll be back in the office sometime on Monday as usual, of course.

Sounds like you've got a nice truck there, congrats on the ATI blower & talk to you soon!