Lots of painting tomorrow
Got some Krylon Fusion satin black. Gonna do the rail caps, rear step pad, front upper bumper and grille. My plastics always look good because I use Armorall on them weekly. However, I want something a little more long term.
I'm not going to remove anything except the grille. I'll make sure I tape off everything good and use an extra layer on the bed. Learned from Darren's write up. Will post pics when finished. |
try this first
http://ep.yimg.com/ca/I/yhst-4177169..._2126_19223202 http://www.autodetailingsolutions.net/srn-b.html or http://ep.yimg.com/ca/I/yhst-4177169...4_2126_3211289 http://www.autodetailingsolutions.net/blackwow.html I have used the restorer and it seems to be doing quite well. After either one of those have dried use this on top. http://www.castleproductsonline.com/...95-nvvinyl.jpg http://www.castleproductsonline.com/...treatment.html After applying the dressing wait a few days and apply a second coat again and you'll be all set with nice black trim for at least a year maybe more. |
I see you neglect to try the Adam's even after seeing a comparison picture.
To each his own :beers: -Curtis- |
Originally Posted by lakemarykid
(Post 4366180)
I see you neglect to try the Adam's even after seeing a comparison picture.
To each his own :beers: -Curtis- |
All times are GMT -4. The time now is 12:51 PM. |
© 2024 MH Sub I, LLC dba Internet Brands