DWV Intake Mod for 2004-2008 F150 with 5.4L Engine
#121
#123
#125
#126
Has anyone done this mod lately? I went to my local Lowe's and they did not carry part number 23455. They did carry a downspout adapter that I believe would work, but not 100% sure on it. When any of you did this did it take some stretching to get that rubber downspout over the coupler?
I did and couldn't be happier with the results!
#128
http://www.stylintrucks.com/part.asp...5&scid=FROOGLE
Then just use ABS pipe between the baffle and this fender cuff?
#129
avoid all that and do it this way https://www.f150online.com/forums/ar...04-2008-a.html
I did and couldn't be happier with the results!
I did and couldn't be happier with the results!
#130
Anyone? Can I use that cuff to put in the fender or not? Somebody should update the material list for this mod cause I've read the whole thing 5 times and it changes on every page. I want to do this mod, but I would rather not grind down ABS pipe and I don't want a rubber adapter that gets sucked in.
#131
There is a revised version of this mod that I posted in post #74 of this thread. You may want to look at doing that one if you have concerns about the downspout connector deforming or getting sucked inside out. Linky below:
https://www.f150online.com/forums/3818781-post74.html
https://www.f150online.com/forums/3818781-post74.html
#133
#134
Yep, I got this done right with the Spectre intake kit as well. Looks very clean, no ABS pipe grinding or other hassles. Mine looks exactly like this: https://www.f150online.com/forums/3818781-post74.html
Thanks kd4crs and FullerF-150 for the answered PM's.
Thanks kd4crs and FullerF-150 for the answered PM's.
#135