F150online Forums

F150online Forums (https://www.f150online.com/forums/)
-   Appearance Products (https://www.f150online.com/forums/appearance-products-48/)
-   -   got my westin's help!!!! (https://www.f150online.com/forums/appearance-products/19948-got-my-westins-help.html)

patrickjp Apr 11, 2001 07:14 PM

got my westin's help!!!!
 
just to save me another headache like the one I just got trying to find where to bolt on the face plates .. can someone help me out?

I can't figure out where the hell the bolts go through.. I found the rubber pieces on the body, they come off easy, but how the heck do you get the bolt through the body?? There's no holes going through ther whole thing!!


any help would be apreciated

------------------
97 F150 XLT: Two-Tone Green and Tan,V6 4.2L auto 4X4, 3.55 gears, 265/75/16 Dueler AT's
MODS:Airaid FIPK, Superchip, Ravin Z55 exhaust SI/SO
GOODIES:12 disk cd changer, jvc 4ch 560watt poweramp, Bazooka tube, Boston Acoustic 5x9's, Tinted Back, Westin Nerf Bars..
http://albums.photopoint.com/j/View?...403&p=43203642

98SCREAMER Apr 11, 2001 07:30 PM

Hey patrickjp,
I'm asuming they are the silver colored plates with the threads sticking out?
The trick is to put one of the bolt threads into the hole first,kind of like carrying a table through a doorway. Then just drop the whole plate inside. grab one of the threads and pull the plate up against the rocker panel from the inside with the threads sticking out the hole. The next trick is to put the BAR mounting bracket up onto the threads without it falling back into the rocker box https://www.f150online.com/f150board/smile.gif It takes a little cursing,and finesse,but once you get it it's pretty quick to do the rest. I do feel for you,the instructions bite,huh? Good luck,,,,,98

------------------
98 F-150 4.6 Litre XLT2wd Ext. cab
Yokahama AVS/ST's,,too noisy:(
prarie tan/tan int.
K/N gen.II fipk
custom dual exh/gibson rectangle tips/rear exiting.
color matched snuglid
Superchip!!!
Clear front corners
Grillcraft grill insert
Speedglo gauges w/carbon fiber overlay,might paint it black
Stillen Quad light air dam,Sweet!!
Euro taillights w/l.e.d. bulbs
Cobra 75WXST cb w/weather alert
Kenwood cd w/Radio Shack speakers,and Soundstream P203e amplifier//Single 10" sub
Viper alarm
On the way/wheels,tires, etc..etc.......
the monochromatic boogie is done,cool!.
Come see my new pictures@ www.my-f150.com

officialtomwaits.com
reverendhortonheat.com

WOW,what a cool site!

FENDER GUITARS ROCK!!!
http://www.my-f150.com/98screamer/rockguitar_md_wht.gif

powerstroke73 Apr 11, 2001 08:57 PM

I think I know what you're talkin about. If I'm right take a thin piece of wire and wrap it around one of the studs and use that to hold the plate in place while you bolt the other side into place. when you have the one side held up you can pull the wire out and bolt up the other stud. Easy huh.

------------------
1997 F-150 Lariat
Ext Cab Short Box
4x4 Off Road Package
3.55 Gears
285/75 R16 Kelly Springfield Trailcutter RTs

http://a1060.g.akamai.net/f/1060/597...2/fea8256a.jpg http://a1060.g.akamai.net/f/1060/597...6/fea82570.jpg https://jer40.tripod.com/bashcomp.gif

My 2 cents worth

If you're gonna stroke it, POWERSTROKE IT!!!

http://www.powerstroke73.homestead.com/

patrickjp Apr 12, 2001 09:14 AM

thanks!


ya think they could have given some better instructions with this thing?

arrrgh!!

btr Apr 12, 2001 11:33 AM

Yea, the instructions suck. It took me longer to figure out where to put the mounting brackets than to actually install them.


All times are GMT -4. The time now is 03:59 PM.


© 2026 MH Sub I, LLC dba Internet Brands