Byoon001's Build Thread
 

Howdy! I guess I'll start one of these suckers as well.

First off sorry about the pictures, I have many more but they were all taken by camera phone and after uploading two and seeing how much they charged me I think I'll go buy some batteries tommorow and take new pictures!

What is coming out is:
SI BM 12''
Rainbow SLC 265's.
Stock rear speakers

What is going in:
(2) IDQ V2 10's
(1) Image Dynamics XS 6.5 Comp Set
(1) Image Dynamics CTX 6x9 CoAx for rearfill

What I hopefully will put in:
Arc Kar 300.4
Arc Kar 1000.1

With all that in mind, we're building a box made of partial mdf and fiberglass. The idea of it all is to have them fire upwards but at an angle so the port is pushing air to the back of the seat. Once I get better pictures I shall upload but until than these will have to do.

P.S. Sorry to steal your idea Styx, but I also plan on cutting out a small window and applying bondo + plexi glass and having a few things etched on there with white lights to highlight!
-Ben
The Box
https://www.f150online.com/galleries...815-202545.jpg

Getting ready to fiberglass
https://www.f150online.com/galleries...815-202546.jpg

Cool! Be sure to keep the pics coming as you take them.

Good luck!
Devildog101

THEIF!!!!!... nah j/k I hope you know what your doing with the window. you can easily screw things up by not doing it right

I can't wait to hear your review of the XS comps. I am thinking about switching to those in the near future but need some reviews. Keep up the work. With that equipment setup and a good install, you should be sounding awesome.:thumbsup:

Can I ask why you are getting rid of the BM? Not happy with the performance or sound?

2 10's > 1 12

Nice, def. keep us updated :rocker:

Styx basically laid it out. (2) 10's > (1) 12. Also I listen to a lot of music with kick bass and double bass so I wanted something that could keep up accurately.

Unfortunately we ran out of resin so I was unable to do anymore actual work to the car. BUT! UPS dropped off some goodies that I was able to snap a couple pictures of. On further note ID we changed the V2's to V3's so I am very excited.

Only have a crappy picture of the sub, camera died before I could grab some more.

To make a long story longer, here are the pictures.
XS Tweeter
https://www.f150online.com/galleries...815-202630.jpg

Midrange
https://www.f150online.com/galleries...815-202629.jpg
https://www.f150online.com/galleries...815-202629.jpg

(2) 10'' IDQ V3
https://www.f150online.com/galleries...815-202643.jpg

Well there you go, I could have taken a picture of rear fill but who wants to see that?

-Ben

And for those of you who can appreciate these pictures!
https://www.f150online.com/galleries...815-202640.jpg
https://www.f150online.com/galleries...815-202639.jpg
https://www.f150online.com/galleries...815-202641.jpg
https://www.f150online.com/galleries...815-202642.jpg

Who can guess what it is!

-Ben

rear fill sux, my box is done, w00t! hand screwing 100 little screws sux

Lol, those mids and V3s look a bit like mini IDMaxs'.

Not really a Stang fan myself, but, that is a damn nice looking car :thumbsup:



Teh Hell??? Its 2007 budday, power tools FTW!

sorry but i'm not wrecking a good peice of plexy. gotta hand tighten them one by one and then go over them about 5 times all around

Wus, hike up your skirt a bit and learn how to use torque settings on a drill. :)

drills have torque settings:confused: .............:lol:

LoL apparently some people didnt realize it. :)