Diode Dynamics Switchback Halo's on my 2013 with Projectors Installed
 

So I decided to change up my modified OEM projectors with the upgraded Hella projectors, 5000K CBI bulbs and 55 watt ballast that have been on the truck since I brought it home. I have wanted to add a set of Halo's to them, but couldn't find just what I was looking for.

Here are the before pictures;

https://cimg6.ibsrv.net/gimg/www.f15...dce3096fc3.jpg


https://cimg4.ibsrv.net/gimg/www.f15...85a2af1b5e.jpg


https://cimg6.ibsrv.net/gimg/www.f15...2f87b0809e.jpg



I recently finally found the Diode Dynamics Halo's for the 13/14 F150's and bought a pair of them. While I didn't capture any pictures of them in the switchback mode they do dim when the heads come on and switch to amber for the turn signal function.

During the rebuild, I thought I would black out some of the chrome and just leave the "C"clamp area around the Halo chrome. I proceeded to mask the chrome off and sprayed the buckets with my black paint. When I pulled the tape off of the buckets some of the chrome came with it. As a result I ended up with a bigger change than I planned on. I ended up painting the full headlight bucket black to match the truck. I also filled in the area around the F150 in the headlight black to highlight it a bit more, not sure why Ford didn't do this from the factory.

Here are a few shots of them after the install, but before the headlight films had fully cleared up.


https://cimg7.ibsrv.net/gimg/www.f15...8687d2ce79.jpg


https://cimg4.ibsrv.net/gimg/www.f15...b946937c98.jpg

https://cimg6.ibsrv.net/gimg/www.f15...daf7835ddc.jpg

https://cimg2.ibsrv.net/gimg/www.f15...f4d5b1f90b.jpg


Let me know what you think. :thumber:

Looks good. You got output pics?

Very nice!

Man, those look great!

If I can ask what size rims and tires are you running sir ? Your whole truck looks flawless

Thanks for the compliment on the truck. I shot the information over to you in a Private Message.

Agreed. Nice work! Compliments the truck really well.