Just picked up my OEM Ford remote starter kit (AC3Z-19G364-A) and the bypass module (8L3Z-19G365-BA) and want to install it on my 2010 F150 Lariat. As expected, there are no installation instructions included. Anyone have a detailed list of what the individual wires attach to, and where to plug the harness into? I have installed several aftermarket remote starters, but they came with instructions..... All the Ford links in old posts are dead, so I would really appreciate some help with this.

 

Found the instructions by calling 1-800-ford-key.
They connected me to a guy at Audiovox (who makes them for Ford) and he emailed me the installation instructions.

Have most of it installed now, but still have 3 wires left to hook up:
1) Blue wire from module to gray/yellow wire for door lock. Instructions say to find wire at drivers kick panel harness... ya, sure... maybe if I pull out the parking brake???. A real rats nest in there...

2) Green/violet wire from module to gray/violet dome light wire. This is located at the "Smart junction box (SJB) C2280A".

3)White wire from module to white/violet wire parking light wire. Located at "SJB C2280E"

I've read that all 3 of these wires can be found behind the PASSENGER side kick panel.

Anyone hooked these 3 remaining wires up and if so, where did you find them?

 

Stuck .... would really love if someone could point out where these plugs are in the kick panel in the SJB? I could take a couple of pics and post them if someone could point them out?