No crank no start no gauge cluster
#1
11-08-2018, 04:55 PM
No crank no start no gauge cluster
Have a 2004 f150 no crank, no start, no gauge activity. The pats light is showing a fault, blinks rapidly. Power windows don't work, radio doesn't work. A few fuses don't have power either side even with key in on position. Any ideas? I've tried unhooking battery for a few hours no luck.
The following users liked this post:
#4
11-09-2018, 12:05 AM
1 run/accessory wipers, instrument cluster
5 keep alive memory for PCM and climate control
6 parklamps BSM instrument illumination
these have no power either side. Not blown. Tried swapping relays around no effect
no interior lights either, flasher relay under dash buzzes
5 keep alive memory for PCM and climate control
6 parklamps BSM instrument illumination
these have no power either side. Not blown. Tried swapping relays around no effect
no interior lights either, flasher relay under dash buzzes
Last edited by Peter Anderson; 11-09-2018 at 12:13 AM.
#6
11-24-2019, 03:17 PM
At last I find a post with the same symptoms I have in my truck, but I don't have any fuse blown.
See this.... https://www.f150online.com/forums/el...itch-lock.html
"...If you have "no cluster" then you automatically have "no crank, no start"...."
How did you resolve it?? Replacing the CJB???
See this.... https://www.f150online.com/forums/el...itch-lock.html
"...If you have "no cluster" then you automatically have "no crank, no start"...."
How did you resolve it?? Replacing the CJB???
Last edited by robb5150; 11-24-2019 at 08:03 PM.
The following users liked this post:
#7
11-24-2019, 06:54 PM
At last I find a post with the same symptoms I have in my truck, but I don't have any fuse blown.
See this.... https://www.f150online.com/forums/20...5-fx4-4wd.html
"...If you have "no cluster" then you automatically have "no crank, no start"...."
How did you resolve it?? Replacing the CJB??? Or did it have to be reprogrammed? Thanks
See this.... https://www.f150online.com/forums/20...5-fx4-4wd.html
"...If you have "no cluster" then you automatically have "no crank, no start"...."
How did you resolve it?? Replacing the CJB??? Or did it have to be reprogrammed? Thanks
Last edited by Ed Monsour; 11-24-2019 at 07:10 PM. Reason: Wrong spelling, expand comment
Trending Topics
#8
11-24-2019, 08:06 PM
By PATS you mean the Passive Anti-Theft System???
Sorry... post edited for link to previous post...
https://www.f150online.com/forums/el...itch-lock.html
Sorry... post edited for link to previous post...
https://www.f150online.com/forums/el...itch-lock.html
Last edited by robb5150; 11-24-2019 at 08:37 PM.
#9
08-30-2020, 11:50 PM
#10
09-05-2020, 10:09 AM
#11
04-15-2021, 08:29 PM
#12
09-26-2021, 06:19 PM
Having the same issue. Ive replaced ignition switch and fuel pump driver module.
2008 ford f150 4.2L 210k miles. Not getting any power to fuse #35 Instrument cluster high beam indicator, High beam headlamps, DRL disable. So far everything new on truck. Alternator, battery, serp belt, starter, fuel pump driver module, and now ignition starter switch.
#13
09-26-2021, 06:22 PM
Having the same issue. Ive replaced ignition switch and fuel pump driver module.
2008 ford f150 4.2L 210k miles. Not getting any power to fuse #35 Instrument cluster high beam indicator, High beam headlamps, DRL disable. So far everything new on truck. Alternator, battery, serp belt, starter, fuel pump driver module, and now ignition starter switch. Any recommendations on what to check next?
