using 2v motor in 3v truck is it doable?
#1
#2
#3
The 03/04 Expy is a 5.4 2v. Seems like you could use the 2v engine harness as it would plug right into the ecu on the firewall, and then a tune. I've been thinking about this as well but more so to do a lightning swap as well as ditch the phaser issues. Still researching but no one replies to anything I send out.
Edit: Might need the Expy intake etc
Edit: Might need the Expy intake etc
#4
Here's a couple threads about someone putting a 5.4 2 valve in a 2008 that came with a 4.6:
https://www.f150online.com/forums/20...ecm-4-6-a.html
https://www.f150online.com/forums/20...4-2v-swap.html
Never did get back to us telling us it's running.
https://www.f150online.com/forums/20...ecm-4-6-a.html
https://www.f150online.com/forums/20...4-2v-swap.html
Never did get back to us telling us it's running.