Missing something lisle spark plug tool?

Reply Subscribe

Thread Tools

Search this Thread

Nov 16, 2015 | 04:39 PM

#16

1-HIGH-4-BY

Senior Member

Joined: Jan 2004

Posts: 250

Likes: 0

From: Adrian,MI

Quote:

Originally Posted by SSStang

OK so kinda stuck now. I got all the plug changed except for one. No 7 won't come out. I broke the top off and used the pusher and can't get the extractor to thread in. Tried and tried for about two hours no luck. Ran the pusher in it a few times vacuum it out and it still won't thread in to pull the lower section out.

Spray some carb cleaner on it yesterday afternoon and left it. May have some time tomorrow to try again. Gonna swing by napa to see if they have a different extractor.

This is exactly why I bought a second extractor. The first one would only bite good on three plugs. I know it's tight but can you put down pressure while trying to thread in the extractor? This helped me on one plug.

Nov 17, 2015 | 01:53 PM

#17

SSStang

Thread Starter

Member

Joined: Jul 2015

Posts: 79

Likes: 0

OK finally got it out. I went to Napa and got a there spark plug extractor kit but before opening it up I clean the threads of the extractor with my dremel went right in.
The truck fired right up and runs good so far.

Thanks for the help