2004 - 2008 F-150

What airbag light code is this?

  #1  
Old 09-13-2012, 02:12 AM
th3godf4th3r's Avatar
Senior Member
Thread Starter
Join Date: Mar 2008
Location: Seattle, Wa
Posts: 841
Likes: 0
Received 1 Like on 1 Post
What airbag light code is this?

hey guys,

08 f-150, airbag light just came started doing this the other day. what code is this?


thanks for the help
 
  #2  
Old 09-13-2012, 11:51 AM
th3godf4th3r's Avatar
Senior Member
Thread Starter
Join Date: Mar 2008
Location: Seattle, Wa
Posts: 841
Likes: 0
Received 1 Like on 1 Post
anyone? i would like to try to fix this today on my off day
 
  #3  
Old 09-13-2012, 12:50 PM
88racing's Avatar
Technical Article Contributor

Join Date: Apr 2009
Location: In the fast lane from LA to Tokyo...
Posts: 10,697
Likes: 0
Received 14 Likes on 14 Posts
If I remember right.....you had an accident awhile back?

Did the air bags deploy? And were they replaced? If they were replaced the rcm should've been replaced also..... LFC 19 = RCM Crash Data Memory Full. This usually occurs after an accident where the airbag(s) have been replaced but the Restraints Control Module was not replaced.

Your best bet is to use a scan tool to show the actual code....the scan tool should be able to read srs codes....
 
  #4  
Old 09-13-2012, 01:25 PM
th3godf4th3r's Avatar
Senior Member
Thread Starter
Join Date: Mar 2008
Location: Seattle, Wa
Posts: 841
Likes: 0
Received 1 Like on 1 Post
Yes it was in an accident in December 2010 but the air bags didn't deploy. This actually started happening around the beginning of the summer. The programmer wouldn't be able to see any codes right?
 
  #5  
Old 09-13-2012, 01:45 PM
88racing's Avatar
Technical Article Contributor

Join Date: Apr 2009
Location: In the fast lane from LA to Tokyo...
Posts: 10,697
Likes: 0
Received 14 Likes on 14 Posts
Originally Posted by th3godf4th3r
Yes it was in an accident in December 2010 but the air bags didn't deploy. This actually started happening around the beginning of the summer. The programmer wouldn't be able to see any codes right?
No the programmer will not be able to see these codes cause they're not obdll/dtc ones.......the scan tool needs to be capable of reading srs codes, the dealer(yes I said dealer) has better scanning equipment then the a scan tool does....
 
  #6  
Old 09-13-2012, 01:46 PM
th3godf4th3r's Avatar
Senior Member
Thread Starter
Join Date: Mar 2008
Location: Seattle, Wa
Posts: 841
Likes: 0
Received 1 Like on 1 Post
its a bit of a drive to the dealer, could autozone scan it? if not, guess ill head to the dealer!
 
  #7  
Old 09-13-2012, 01:51 PM
88racing's Avatar
Technical Article Contributor

Join Date: Apr 2009
Location: In the fast lane from LA to Tokyo...
Posts: 10,697
Likes: 0
Received 14 Likes on 14 Posts
Originally Posted by th3godf4th3r
its a bit of a drive to the dealer, could autozone scan it? if not, guess ill head to the dealer!
I really don't that autozone could scan for srs codes.....

If it is the found that the rcm memory is full a new one will have to be purchased and programmed to your truck.....but there are some places that do reprogram them<<<>>>you'll need to look for these places online...

Check out srsmodule.com or airbagsystems.com, or many others. Do a search for SRS reset.
 

Last edited by 88racing; 09-13-2012 at 01:53 PM.


Thread Tools
Search this Thread
Quick Reply: What airbag light code is this?



All times are GMT -4. The time now is 07:33 PM.