![]() |
Tan leather shifter cover installed
I wanted everyone to see the tan leather cover with the stitching laced to match the steering wheel cover. I stitched it underneath then back over, which is the way my leather steering wheel cover is.
The tan one that I received had the top part rolled over but not the bottom. I actually like it fine this way so I am just going to leave it. The color and texture of the leather match my interior perfectly! Please keep this thread on topic. https://www.f150online.com/galleries...6-8-173854.jpg https://www.f150online.com/galleries...6-8-173853.jpg Here is a close-up of the stitching. You gotta love the Nikon D50! https://www.f150online.com/galleries...6-8-173864.jpg |
i want it? haha
how much? 50 bucks??? was it just a simple stich up and done? |
Looks great! I think that's how the Mark LT shifter is stitched as well.
Looks good, Duke |
Looks good, mine still hasn't got here.
|
Nice jod:thumbsup: I like the way you stiched yours. How hard was it to keep it tight doing it like that?
|
Originally Posted by whitecrystal1
Nice job:thumbsup: I like the way you stitched yours. How hard was it to keep it tight doing it like that?
When I got to the bottom I ran it down into the last hole on each side and then went over and down into the opposite hole. I then tied a triple knot from underneath and cut off the excess. I guess those sewing lessons my mom gave me paid off. She used to be a sewing instructor. |
Looks good!
|
Originally Posted by RockPick
Looks good!
|
In my opinion, I think it looks better without the cover.
|
I stitched mine that way the first time, with the waxed thread.....but didn't like it at all in my truck.
So, I cut it off and used the white thread that matches the KR thread in the seats, and used the cross stitch this time. https://www.f150online.com/galleries...206-173833.jpg :wave: |
Originally Posted by rocky85
In my opinion, I think it looks better without the cover.
...and never fail to go out of your way to go against the grain. |
|
Originally Posted by BlueFlareside
Thanks! And thank you for arranging the group buy!!
Thanks for the kudos. I think it's a nice upgrade; especially for those who didn't want to go down the LT ****er pathway. I had pressed Eddie to make these several months ago. Whitecrystal1 actually convinced him to make them. All in all, I think they turned out very nice all the way across the board. This mod isn't for everyone - no doubt. Everyone has opinions about how they want their truck to look but, for me, this is a nice little touch that makes a difference in look. In my opinion, it's these subtle touches that set certain trucks apart from the others. :thumbsup: |
Originally Posted by RockPick
Thanks for posting that man... That is DEFINITELY how I want mine to look. Very nice work there!
|
looking good- nice stitching!
|
i think ima have to buy one =]
|
Originally Posted by RockPick
Sure thing...
Thanks for the kudos. I think it's a nice upgrade; especially for those who didn't want to go down the LT ****er pathway. I had pressed Eddie to make these several months ago. Whitecrystal1 actually convinced him to make them. All in all, I think they turned out very nice all the way across the board. This mod isn't for everyone - no doubt. Everyone has opinions about how they want their truck to look but, for me, this is a nice little touch that makes a difference in look. In my opinion, it's these subtle touches that set certain trucks apart from the others. :thumbsup: |
Originally Posted by RockPick
...and you're entitled to that opinion.
...and never fail to go out of your way to go against the grain. |
Originally Posted by rocky85
I believe the vast majority would agree with me. You can get a complete leather steering wheel cover for less than $50. I still think it's overpriced. Also, in Koolaid's picture, it looks wrinkled.
|
Off topic? You could say the same about literally 90% of the posts on here.
|
Originally Posted by rocky85
I believe the vast majority would agree with me. You can get a complete leather steering wheel cover for less than $50. I still think it's overpriced. Also, in Koolaid's picture, it looks wrinkled.
You're right. I'm wrong. We all are horrible people for buying these... yadda-yadda-yadda. It's old rocky85, let it go? |
Originally Posted by RockPick
You're right. I'm wrong. We all are horrible people for buying these... yadda-yadda-yadda. It's old rocky85, let it go?
|
Originally Posted by rocky85
LOL. A little testy are we?
Drop it dude. :rolleyes: Back to the topic, i think that looks awesome! Id sure love to snatch one but im stretched as far as i can go financially right now. I did try to see if the rents would give it to me for Christmas :lol: |
Originally Posted by rocky85
Also, in Koolaid's picture, it looks wrinkled.
That's a refection of the chrome shifter surround you are seeing. But thanks for looking. :thumbsup: :wave: |
You're welcome. It's always a pleasure to look at your truck, Kool Aid. :thumbsup:
|
Looks good Blue...great stitch job...I was looking at this site http://www.fieggen.com/shoelace/lacingmethods.htm some good ideas for others that may want to change the way the instructions say to stitch..
R/ Craig |
Originally Posted by 26point2
Looks good Blue...great stitch job...I was looking at this site http://www.fieggen.com/shoelace/lacingmethods.htm some good ideas for others that may want to change the way the instructions say to stitch..
R/ Craig |
I really like this mod. To bad I don't have a floor shifter now in the 250.:(
|
Some more pics
|
That looks *really* good.
|
Recieved my Sat and installed yesterday (Sunday). One of the best looking mods I've done to any vehicle. Makes the entire interior look a bit more classy. Not posting pictures since there are plenty already here. But, it looks the same as the others. That plastichrome top was starting to peel on my shifter and this covered it up perfectly.
One person comented about it being rolled on the top but not on the bottom. Mine was rolled on both. |
any more ideas for leather mods to a F150?
|
Ok so I missed the boat on the group buy I see. Where do I get one of these or is there a link with different colors? My interior is black and grey.
thanks Mike |
I can't post a link due to respect to forums rules but someone else could or start a new thread on it ...
|
Originally Posted by BlueFlareside
(Post 2361647)
I wanted everyone to see the tan leather cover with the stitching laced to match the steering wheel cover. I stitched it underneath then back over, which is the way my leather steering wheel cover is.
The tan one that I received had the top part rolled over but not the bottom. I actually like it fine this way so I am just going to leave it. The color and texture of the leather match my interior perfectly! Please keep this thread on topic. https://www.f150online.com/galleries...6-8-173854.jpg https://www.f150online.com/galleries...6-8-173853.jpg Here is a close-up of the stitching. You gotta love the Nikon D50! https://www.f150online.com/galleries...6-8-173864.jpg |
Originally Posted by tg150
(Post 3342012)
WOW thats look awsome..Where did you get the shifter cover? I have a lariat with tan interior also.. Thanks..
Ranch-it-out is the man. http://ranchitout.com/_wsn/page3.html |
Originally Posted by BlueFlareside
(Post 3342064)
We had a group buy quite some time ago (when I posted this originally back in November of '06).
Ranch-it-out is the man. http://ranchitout.com/_wsn/page3.html |
Originally Posted by tg150
(Post 3342250)
well thankyou once again for your help i appreciate it.. I did go to the sight thought and its under construction, i couldnt get a # or anything and checked there ebay store and they have nothing up for auction :(. Guess ill have to keep me eyes on it.. ty very much.
https://www.f150online.com/forums/se...member&u=88226 |
All times are GMT -4. The time now is 10:56 AM. |
© 2024 MH Sub I, LLC dba Internet Brands