325/60/20's????
 

Will these fit on a F150 4x4 with a 2" AS and AAL? Overall diameter is 35.5"!! I have an opportunity to buy these at a reduced rate!!!!!:help:

Any help would be appreciated!!!!


Nebraska

With LOTS of trimming. I;ve seen a truck on here before that had the same thing. I wouldn't recommend it.

I had the Nitto terra grappler A/T the same size and the fit with just the leveling kit and I had just minor rubbing.

REDTXFX4,

Thats waht I was did nt waht to hear!!!!:( Do you remember who it was who had them?


diggler8,

Do you have any pics??

Thanks guys!!

Nebraska

I will get you some pictures!


diggler8,

Do you have any pics??

Thanks guys!!

Nebraska[/QUOTE]

Thanks diggler8!!!

Nebraska

I have 33 nittos on 20s and I got mine insalled, and the guy trimmed, and I still get rubbing. Look at it this way, you can probably get it to work, but if you are going to take it off road you are going to run into a few problems
1. When mudding the mud is more likely to get up under the truck
2. When off roading, the tires will rub in the wheel wells if you hit any major bumps.

All that I would say is yes you will be able to do it, but at a price which is rubbing and dirt and road grime getting up under the wheel wells

Here are a few pictures sorry I dont have any real close up's.

https://www.f150online.com/galleries...850-158905.jpg
https://www.f150online.com/galleries...850-158904.jpg

diggler8,

Those are 325/60/20's ??? Very nice!!!!!:drool: Is that yours?? What lift??

Thanks,

Nebraska

Thanks.. yeah its mine. I have since changed the rims and added a 6" Fabtech lift. I did have to trim the inner fender liner a little but not to much. Yes they are 325 60 r20 Nitto t grappler A/T.

diggler8,

Thanks for the picks!!!! Do you have a 2" or a 2.5" leveling kit on it in these pics?

Thanks,

Nebraska

I had a 2.5" daystar kit.

diggler8,

Sorry for all the questions, but do you think the OEM wheels would make the tires rub worse than your after market ones did?:)

Thanks,

Nebraska

no problem... The offset I had was very similar to the stock offset so it should be about the same.

Well I ordered the AS2" Powder Coated Black. My wife said the AAL arrived today!!:thumbsup:
I have called a couple shops and they are quoting between $250-350 for install of both. Does this sound right?
Once installed I have a local tire shop who is going to test fit tires for me for fitment. :rocker:

Thanks,

Nebraska