You guys are gonna think I am FREEKIN CRAZY!!
Senior Member
Joined: Sep 2004
Posts: 1,020
Likes: 0
From: US
Putting an XLT console in a regular cab and making it a two seater I can see... putting the Lariat flow through console in an XLT screw or scab, I can't. Still beyond me why they put a non-adjustable 20% seat in the regular cab, can't even put my daughter's carseat on it without it nearly hitting the dash. 
To each his own I suppose.
To each his own I suppose.
Thread Starter
|
Senior Member
Joined: Jun 2005
Posts: 1,330
Likes: 0
From: Ashburn, Virginia
Originally Posted by TCC-
Where did you find the dash???
quackrstackr, good point and I SHOULD have in hindsight, but I didn't. Not concerning myself regarding any resale value and if that was my only motivation, it would be a very stupid and economically unjust. I am doing this because one, I like it and want to pull it off, shifter included, and two, because I can't leave my truck alone!
Thread Starter
|
Senior Member
Joined: Jun 2005
Posts: 1,330
Likes: 0
From: Ashburn, Virginia
Originally Posted by ccla
how bout a link to that E-bay auction. I want to do the same as I have the console already and just need the dash they might have 2
You got it. http://cgi.ebay.com/ebaymotors/ws/eB...DME:L:RTQ:US:1
Senior Member
Joined: Jun 2005
Posts: 2,376
Likes: 2
From: Plano, TEXAS
Originally Posted by FX4&EXCURSION
Well, I have come across a flow thru console dashboard for 200 bucks. I am gonna do the full flow thru conversion. I'm pulling my dash and putting in the correct flow thru model. I have basically everything else except the shifter, front lower connector brackets to the dash and trim around the shifter. Wish me luck and I'll take pics. I've pulled dashes before, so I know what I'm getting into. 
I'm going ALL the way and HARD CORE!!!!!!!!!!!!!! 
I'm going ALL the way and HARD CORE!!!!!!!!!!!!!!
Thread Starter
|
Senior Member
Joined: Jun 2005
Posts: 1,330
Likes: 0
From: Ashburn, Virginia
Originally Posted by -TXF150-
OK. So why didnt you get the floor shifter and flow through console when you bought the truck? In my opinion I dont think its worth all of the work. Considering you will still have the column shifter.