My white mono Screw Lariat is gonna get stripes, but I am not the creative type to design my own. (For example, I used electrical tape for thought starters... )

Would appreciate pic's of what others have done. I've seen a couple posted, but I'm sure a lot of designs are being applied.

Also, advice on where you got 'em, and appx cost would be appreciated. Thx.

 

You are looking for 3M Scotchcal pin-striping. Generally you can find it at a truck/car specialty store or from a local automotive paint supply store.

 

I saw a Red XLT on a dealer's lot with one silver pinstripe and another black one about a 1/4" apart running between the side windows and the door handles and the length of the truck.

They ran the lenth of the truck and followed the notch in the window with straight lines for the most part. There may have even been a second black stripe on the doors that didn't run the whole length of the truck.

I thought it looked really good and added a bit of a custom look without over-doing it.

 

A couple of days ago I saw a black 2004 4x4 lariat with thin red pin strips that started at the front and turned into small flames on the bed. It also had large chrome wheels and a tonneau. The overall look reminded me of a Harley. Really sharp!

 

Here's a crude pic. Anyone else seen one like this or is this a custom job?

https://www.f150online.com/galleries....cfm?gnum=3297

 

Wow! That pictures so clear!

lol

 

Sorry, I said it was a "crude" pic.

 

May not be what you're looking for, but check my gallery (link in my signature) for a pic of my current truck. Larger picture can be seen HERE. In about 2-1/2 weeks, this will no longer be my "current" truck 'cause I should be picking up my 2004 F-150 FX4 SCrew on the weekend of Nov. 8!