97 f150 4.2 temp guage pegs
temp guage stays high with key on all the time other guages are ok. Is this temp guage still a simple analog circuit ? and maybe just a short to ground ? and does anyone have a wiring diagram for this ?
|
You can check the temp sensor by using a DMM in resistance. If it has a short/open, it will indicate it.
|
It is not a simple analog circuit. It's progressive till it gets up to normal operating temperature, then it stays in the middle till it overheats, then it will suddenly peg.
|
I have a similar issue with my temp gauge. Does anyone know the location of the temp sensor so I can test it out? Thanks!
|
https://cimg7.ibsrv.net/gimg/www.f15...d780ae588c.jpg
According to this diagram the Cylinder Head Temp sensor is located in the rear from the passenger side. Is this the temp sensor we are referring too? (C107) |
Yes, the temp gauge uses the CHT sensor since about 1999.
|
Cool! I guess i should start there and see if the wires are okay before removing the gauge cluster for possible repair.
|
All times are GMT -4. The time now is 09:20 AM. |
© 2024 MH Sub I, LLC dba Internet Brands