35's with 4inches of lift ?
 

Sorry if this is an easy one. Is it possible to run 35's with a 4inch lift?? I have 33x12.50's on my 03 XLT 4x4 stock with very minimal triming on the front plastic valance and they don't rub at all. Ive noticed a majority with 35's are running 6inches of lift, is there a reason on clearance or anything? don't know how to post pics, but there is one in picture gallery with rims on truck.
Thanks!

yes with the rite back spacing their is no problems

you can run 35" tires with only a 2" lift thats the cheapest way theres a vid on youtube that shows you a guy liting his 03

thanx, have to check that out.

Yes, they will fit. I have 35's with only a 3 inch body lift.

I have 35's with just my torsion bars cranked and 2" lift shackles in the rear. and they don't rub.

Hows the ride with the torsion bars cranked all the way? Any difference with steering tightness or anything?

they aren't cranked all the way. Its about 2.5" above stock.

Increasing the prload on the torsion bars makes the initial portion of the suspension's travel slightly stiffer. Some people love this, some hate it.

I would like to be a little softer, but its easily bearable.

Yeah like everyone else says....deff can fit em...i have only 2.5 inch leveling and i could fit 35's

I have 35 12.50s and a 4 inch suspension lift without any problems.