My lil 4.6L working VERY hard well it should have been..
#181
#182
yes sir still at it. havnt over loaded it in a while my buddy got an 2003 F250 with an 8' bed so we have been using that alot his son also got a 2001 dodge 2500. so my little F150 hasnt been called on in a while.
the shackles finaly gave out though. suprised they lasted 160,000 miles.
truck now has 170,000 mile and is running like a champ.
the shackles finaly gave out though. suprised they lasted 160,000 miles.
truck now has 170,000 mile and is running like a champ.
#183
Well went through this whole thread sat night. a friend said "My chevy 1500 i over loaded with 2 yards of sod"i said oh ya you got pics? no i dont but it did it.
so i had him look through all 13 pages lol lots of good times. and he just wrecked his jeep and wants to cut it up and throw it in my bed to the scrap yard i said ya lets do it!!!
hahaha
so i had him look through all 13 pages lol lots of good times. and he just wrecked his jeep and wants to cut it up and throw it in my bed to the scrap yard i said ya lets do it!!!
hahaha
#186
#187
10-4 buddy, come on back
A horse trailer on a cadillac
Yeah, we're talkin' to the cowboy
In the coupe de ville
Chug-a-luggin' up one side
Slidin' down the other
I'm a lover of the other side of the hill
A horse trailer on a cadillac
Yeah, we're talkin' to the cowboy
In the coupe de ville
Chug-a-luggin' up one side
Slidin' down the other
I'm a lover of the other side of the hill
#191
#193
#194
Been my "working" truck since 1986, built my house, hauled cross ties, block, trees, gravel, but now she just pulls logs, occasional stump, trash that doesn't fit under the other truck's bed cover ... and of course, wood pellets. Not often but more than once has hauled 3k ponds. A ton is pretty easy but is about the most I intentionally haul on it, just need plan stops, go easy on the gas pedal like mash half way and let the engione just pull, it'll get there. 45-50 is plenty of speed.
Low compression 351M, C-6 kitted, 3.50 gears, it's a '77 F-150. I had two tons delivered today, they used a F-550 flat bed.
The old girl is partly stripped, gonna get new bed sides, doors, paint, fenders, tailgate too this fall/winter. Gonna go white, no race track, might add free wheeling vynil in spring. Only has a little over 105k. That is a oak pallet loaded with fifty 40 pound bags of wood pellets. When loading, we use the fork truck to set the pallet in the bed at rear, then use an empty pallet to push it forwards on the bed liner. If I need to haul heavy and can't use the '77, I use my trailer and the '07 .... to pull it.
Fun thread.
Low compression 351M, C-6 kitted, 3.50 gears, it's a '77 F-150. I had two tons delivered today, they used a F-550 flat bed.
The old girl is partly stripped, gonna get new bed sides, doors, paint, fenders, tailgate too this fall/winter. Gonna go white, no race track, might add free wheeling vynil in spring. Only has a little over 105k. That is a oak pallet loaded with fifty 40 pound bags of wood pellets. When loading, we use the fork truck to set the pallet in the bed at rear, then use an empty pallet to push it forwards on the bed liner. If I need to haul heavy and can't use the '77, I use my trailer and the '07 .... to pull it.
Fun thread.
Last edited by tbear853; 11-01-2021 at 10:46 AM.
The following users liked this post: